drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / ls1021aqds.h

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 62cf6e5553277724b31d2ae8ca905433c6cc03bd..2da6fba43d1daacf127b58b44bf363e1cdb0d925 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -9,20 +9,16 @@
 
 #define CONFIG_LS102XA
 
-#define CONFIG_ARMV7_PSCI
+#define CONFIG_ARMV7_PSCI_1_0
 
-#define CONFIG_SYS_FSL_CLK
+#define CONFIG_ARMV7_SECURE_BASE       OCRAM_BASE_S_ADDR
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_DEEP_SLEEP
-#if defined(CONFIG_DEEP_SLEEP)
-#define CONFIG_SILENT_CONSOLE
-#endif
 
 /*
  * Size of malloc() pool
@@ -65,15 +61,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0xe8
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x600
 
@@ -103,15 +90,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 
 #define CONFIG_SPL_TEXT_BASE           0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x1a000
@@ -144,7 +122,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
 #ifndef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDR3            /* Use DDR3 memory */
 #define CONFIG_SYS_DDR_RAW_TIMING
 #endif
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
@@ -159,8 +136,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #endif
 
-#define CONFIG_SYS_HAS_SERDES
-
 #define CONFIG_FSL_CAAM                        /* Enable CAAM */
 
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
@@ -279,10 +254,19 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_SHIFT              0
 #define QIXIS_LBMAP_DFLTBANK           0x00
 #define QIXIS_LBMAP_ALTBANK            0x04
+#define QIXIS_PWR_CTL                  0x21
+#define QIXIS_PWR_CTL_POWEROFF         0x80
 #define QIXIS_RST_CTL_RESET            0x44
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START  0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
+#define QIXIS_CTL_SYS                  0x5
+#define QIXIS_CTL_SYS_EVTSW_MASK       0x0c
+#define QIXIS_CTL_SYS_EVTSW_IRQ                0x04
+#define QIXIS_RST_FORCE_3              0x45
+#define QIXIS_RST_FORCE_3_PCIESLOT1    0x80
+#define QIXIS_PWR_CTL2                 0x21
+#define QIXIS_PWR_CTL2_PCTL            0x2
 
 #define CONFIG_SYS_FPGA_CSPR_EXT       (0x0)
 #define CONFIG_SYS_FPGA_CSPR           (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
@@ -395,7 +379,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * I2C
  */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
@@ -413,11 +396,9 @@ unsigned long get_board_ddr_clk(void);
  * MMC
  */
 #define CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
 /* SPI */
@@ -431,7 +412,6 @@ unsigned long get_board_ddr_clk(void);
 
 /* DM SPI */
 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
-#define CONFIG_CMD_SF
 #define CONFIG_DM_SPI_FLASH
 #define CONFIG_SPI_FLASH_DATAFLASH
 #endif
@@ -454,31 +434,19 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT                1
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
 #endif
 
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
-#endif
-
 /*
  * Video
  */
 #define CONFIG_FSL_DCU_FB
 
 #ifdef CONFIG_FSL_DCU_FB
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_I2C_DVI_BUS_NUM     0
@@ -533,9 +501,8 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* PCIe */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
-#define CONFIG_PCIE1           /* PCIE controler 1 */
-#define CONFIG_PCIE2           /* PCIE controler 2 */
+#define CONFIG_PCIE1           /* PCIE controller 1 */
+#define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 
@@ -560,19 +527,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#undef CONFIG_CMD_IMLS
-#endif
-
-#define CONFIG_ARMV7_NONSEC
-#define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200
@@ -583,7 +540,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_FSL_DEVICE_DISABLE
 
-#define CONFIG_BOOTDELAY               3
 
 #define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 
@@ -605,8 +561,6 @@ unsigned long get_board_ddr_clk(void);
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE              \
@@ -614,9 +568,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
@@ -667,8 +618,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SECT_SIZE           0x20000 /* 128K (one sector) */
 #endif
 
-#define CONFIG_CMD_BOOTZ
-
 #define CONFIG_MISC_INIT_R
 
 /* Hash command with SHA acceleration supported in hardware */