drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / ls1021aqds.h

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index ee331985aaf2f8ea926a8b5258cd8d20fed8cf0a..2da6fba43d1daacf127b58b44bf363e1cdb0d925 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -15,16 +15,10 @@
 
 #define CONFIG_SYS_FSL_CLK
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_DEEP_SLEEP
-#if defined(CONFIG_DEEP_SLEEP)
-#define CONFIG_SILENT_CONSOLE
-#endif
 
 /*
  * Size of malloc() pool
@@ -67,7 +61,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
-#define CONFIG_SPL_WATCHDOG_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0xe8
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x600
 
@@ -97,7 +90,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
-#define CONFIG_SPL_WATCHDOG_SUPPORT
 
 #define CONFIG_SPL_TEXT_BASE           0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x1a000
@@ -130,7 +122,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
 #ifndef CONFIG_SYS_FSL_DDR4
-#define CONFIG_SYS_FSL_DDR3            /* Use DDR3 memory */
 #define CONFIG_SYS_DDR_RAW_TIMING
 #endif
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
@@ -145,8 +136,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #endif
 
-#define CONFIG_SYS_HAS_SERDES
-
 #define CONFIG_FSL_CAAM                        /* Enable CAAM */
 
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
@@ -271,6 +260,13 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START  0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
+#define QIXIS_CTL_SYS                  0x5
+#define QIXIS_CTL_SYS_EVTSW_MASK       0x0c
+#define QIXIS_CTL_SYS_EVTSW_IRQ                0x04
+#define QIXIS_RST_FORCE_3              0x45
+#define QIXIS_RST_FORCE_3_PCIESLOT1    0x80
+#define QIXIS_PWR_CTL2                 0x21
+#define QIXIS_PWR_CTL2_PCTL            0x2
 
 #define CONFIG_SYS_FPGA_CSPR_EXT       (0x0)
 #define CONFIG_SYS_FPGA_CSPR           (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
@@ -448,13 +444,9 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_DCU_FB
 
 #ifdef CONFIG_FSL_DCU_FB
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_I2C_DVI_BUS_NUM     0
@@ -509,7 +501,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* PCIe */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 #define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
@@ -539,8 +530,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
-#define CONFIG_ARMV7_NONSEC
-#define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200