ns16550: move CONFIG_SYS_NS16550 to Kconfig

[people/ms/u-boot.git] / include / configs / ls1021aqds.h

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 536d9f3a58bb0dffeb6413b7229b806e1aa912ba..bf0614cc73876b2feb4508cc080666f0a8fe61dd 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -7,11 +7,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_cmd_default.h>
-
 #define CONFIG_LS102XA
 
-#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_ARMV7_PSCI
+
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -19,6 +19,11 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 
+#define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
+#define CONFIG_SILENT_CONSOLE
+#endif
+
 /*
  * Size of malloc() pool
  */
@@ -64,7 +69,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0xe8
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x400
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x600
 
 #define CONFIG_SPL_TEXT_BASE           0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x1a000
@@ -72,11 +77,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_PAD_TO              0x1c000
 #define CONFIG_SYS_TEXT_BASE           0x82000000
 
-#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
+#define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE + \
+               CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_MONITOR_LEN         0x80000
+#define CONFIG_SYS_MONITOR_LEN         0xc0000
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
@@ -118,7 +124,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0x67f80000
+#define CONFIG_SYS_TEXT_BASE           0x60100000
 #endif
 
 #define CONFIG_NR_DRAM_BANKS           1
@@ -245,7 +251,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -365,11 +370,15 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Serial Port
  */
+#ifdef CONFIG_LPUART
+#define CONFIG_FSL_LPUART
+#define CONFIG_LPUART_32B_REG
+#else
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+#endif
 
 #define CONFIG_BAUDRATE                        115200
 
@@ -379,12 +388,16 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 
 /*
  * I2C bus multiplexer
  */
 #define I2C_MUX_PCA_ADDR_PRI           0x77
 #define I2C_MUX_CH_DEFAULT             0x8
+#define I2C_MUX_CH_CH7301              0xC
 
 /*
  * MMC
@@ -397,33 +410,72 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
-/* QSPI */
+/* SPI */
 #ifdef CONFIG_QSPI_BOOT
+/* QSPI */
 #define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE                        0x40000000
 #define FSL_QSPI_FLASH_SIZE            (1 << 24)
 #define FSL_QSPI_FLASH_NUM             2
+#define CONFIG_SPI_FLASH_SPANSION
+
+/* DSPI */
+#define CONFIG_FSL_DSPI
 
+/* DM SPI */
+#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 #define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_DM_SPI_FLASH
+#define CONFIG_SPI_FLASH_DATAFLASH
+#endif
 #endif
 
 /*
  * USB
  */
-#define CONFIG_HAS_FSL_DR_USB
+/* EHCI Support - disbaled by default */
+/*#define CONFIG_HAS_FSL_DR_USB*/
 
 #ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#endif
+
+/*XHCI Support - enabled by default*/
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT                1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
+#endif
 
-#ifdef CONFIG_USB_EHCI
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
 #define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_CMD_EXT2
 #endif
+
+/*
+ * Video
+ */
+#define CONFIG_FSL_DCU_FB
+
+#ifdef CONFIG_FSL_DCU_FB
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
+#define CONFIG_FSL_DIU_CH7301
+#define CONFIG_SYS_I2C_DVI_BUS_NUM     0
+#define CONFIG_SYS_I2C_QIXIS_ADDR      0x66
+#define CONFIG_SYS_I2C_DVI_ADDR                0x75
 #endif
 
 /*
@@ -479,32 +531,63 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF  0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE      0x00001000      /* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF  0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE      0x00001000      /* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS         0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF    0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE                0x00010000      /* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS                0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF   0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE       0x08000000      /* 128M */
+
+#ifdef CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#endif
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
-#ifdef CONFIG_QSPI_BOOT
-#undef CONFIG_CMD_IMLS
-#else
-#define CONFIG_CMD_IMLS
-#endif
+#define CONFIG_ARMV7_NONSEC
+#define CONFIG_ARMV7_VIRT
+#define CONFIG_PEN_ADDR_BIG_ENDIAN
+#define CONFIG_LAYERSCAPE_NS_ACCESS
+#define CONFIG_SMP_PEN_ADDR            0x01ee0200
+#define CONFIG_TIMER_CLK_FREQ          12500000
 
 #define CONFIG_HWCONFIG
-#define HWCONFIG_BUFFER_SIZE           128
+#define HWCONFIG_BUFFER_SIZE           256
+
+#define CONFIG_FSL_DEVICE_DISABLE
 
 #define CONFIG_BOOTDELAY               3
 
-#define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+#define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 
+#ifdef CONFIG_LPUART
+#define CONFIG_EXTRA_ENV_SETTINGS       \
+       "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
+       "fdt_high=0xcfffffff\0"         \
+       "initrd_high=0xcfffffff\0"      \
+       "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
+#else
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
        "fdt_high=0xcfffffff\0"         \
        "initrd_high=0xcfffffff\0"      \
        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
+#endif
 
 /*
  * Miscellaneous configurable options
@@ -519,7 +602,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_ENV_EXISTS
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
@@ -528,6 +610,8 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_LOAD_ADDR           0x82000000
 
+#define CONFIG_LS102XA_STREAM_ID
+
 /*
  * Stack sizes
  * The stack sizes are set up in start.S using the settings below
@@ -573,6 +657,7 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
 #define CONFIG_CMD_BOOTZ
 
 #define CONFIG_MISC_INIT_R
@@ -583,6 +668,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
+#include <asm/fsl_secure_boot.h>
 #endif
 
 #endif