drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / ls1021atwr.h

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index b2e431a1c903ba3dea544fd20bb48d23b38f1398..831b4dbc482a8c91dc830ccae91be9c1e237bc5e 100644 (file)
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -9,19 +9,15 @@
 
 #define CONFIG_LS102XA
 
-#define CONFIG_ARMV7_PSCI
+#define CONFIG_ARMV7_PSCI_1_0
 
-#define CONFIG_SYS_FSL_CLK
+#define CONFIG_ARMV7_SECURE_BASE       OCRAM_BASE_S_ADDR
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_DEEP_SLEEP
-#ifdef CONFIG_DEEP_SLEEP
-#define CONFIG_SILENT_CONSOLE
-#endif
 
 /*
  * Size of malloc() pool
@@ -57,18 +53,10 @@
 
 #ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_XHCI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
 #endif
 
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_EXT2
-#endif
-
 /*
  * Generic Timer Definitions
  */
@@ -118,16 +106,19 @@
 #endif
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0xe8
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE                         (16 << 10)
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image.
+ */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             (0x400 + \
+               (CONFIG_U_BOOT_HDR_SIZE / 512)
+#else
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x400
+#endif /* ifdef CONFIG_SECURE_BOOT */
 
 #define CONFIG_SPL_TEXT_BASE           0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x1a000
@@ -140,7 +131,18 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
+
+#ifdef CONFIG_U_BOOT_HDR_SIZE
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image. Here u-boot max. size is 512K. So if binary
+ * size increases then increase this size in case of secure boot as
+ * it uses raw u-boot image instead of fit image.
+ */
+#define CONFIG_SYS_MONITOR_LEN         (0x80000 + CONFIG_U_BOOT_HDR_SIZE)
+#else
 #define CONFIG_SYS_MONITOR_LEN         0x80000
+#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
@@ -162,8 +164,6 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_SYS_HAS_SERDES
-
 #define CONFIG_FSL_CAAM                        /* Enable CAAM */
 
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
@@ -281,7 +281,6 @@
 /*
  * I2C
  */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
@@ -301,11 +300,9 @@
  * MMC
  */
 #define CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
 /* SPI */
@@ -320,7 +317,6 @@
 
 /* DM SPI */
 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
-#define CONFIG_CMD_SF
 #define CONFIG_DM_SPI_FLASH
 #endif
 
@@ -330,13 +326,9 @@
 #define CONFIG_FSL_DCU_FB
 
 #ifdef CONFIG_FSL_DCU_FB
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 #define CONFIG_FSL_DCU_SII9022A
 #define CONFIG_SYS_I2C_DVI_BUS_NUM     1
@@ -382,9 +374,8 @@
 #endif
 
 /* PCIe */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
-#define CONFIG_PCIE1           /* PCIE controler 1 */
-#define CONFIG_PCIE2           /* PCIE controler 2 */
+#define CONFIG_PCIE1           /* PCIE controller 1 */
+#define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 
@@ -409,19 +400,9 @@
 #define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#undef CONFIG_CMD_IMLS
-#endif
-
-#define CONFIG_ARMV7_NONSEC
-#define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200
@@ -432,7 +413,6 @@
 
 #define CONFIG_FSL_DEVICE_DISABLE
 
-#define CONFIG_BOOTDELAY               3
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
@@ -450,8 +430,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE              \
@@ -459,9 +437,6 @@
 #define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
@@ -510,8 +485,6 @@
 #define CONFIG_ENV_SECT_SIZE           0x20000 /* 128K (one sector) */
 #endif
 
-#define CONFIG_CMD_BOOTZ
-
 #define CONFIG_MISC_INIT_R
 
 /* Hash command with SHA acceleration supported in hardware */