common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / ls1043aqds.h

diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 398f1c3f7723bec6f2758515a5bd2fe5faff3622..820adc485fb083242f636887a99f3e9d6f17c7b7 100644 (file)
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -9,11 +9,10 @@
 
 #include "ls1043a_common.h"
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_TEXT_BASE           0x82000000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_SYS_TEXT_BASE           0x40010000
 #else
 #define CONFIG_SYS_TEXT_BASE           0x60100000
 #endif
@@ -23,8 +22,8 @@ unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
-#define CONFIG_SYS_CLK_FREQ            100000000
-#define CONFIG_DDR_CLK_FREQ            100000000
+#define CONFIG_SYS_CLK_FREQ            get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ            get_board_ddr_clk()
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -33,7 +32,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
-#define CONFIG_NR_DRAM_BANKS           1
+#define CONFIG_NR_DRAM_BANKS           2
 
 #define CONFIG_DDR_SPD
 #define SPD_EEPROM_ADDRESS             0x51
@@ -85,19 +84,36 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_SD_BOOT
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_FSL_PBL_RCW \
+       board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg
+#else
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
 #endif
+#endif
+
+/* LPUART */
+#ifdef CONFIG_LPUART
+#define CONFIG_LPUART_32B_REG
+#endif
 
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_SCSI
 #define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM              0
+#define CONFIG_SYS_I2C_EEPROM_ADDR             0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
+
 #define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
@@ -108,6 +124,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * IFC Definitions
  */
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_NOR0_CSPR_EXT       (0x0)
 #define CONFIG_SYS_NOR0_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
                                CSPR_PORT_SIZE_16 | \
@@ -135,7 +152,7 @@ unsigned long get_board_ddr_clk(void);
                                        FTIM2_NOR_TWP(0x1c))
 #define CONFIG_SYS_NOR_FTIM3           0
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
@@ -191,6 +208,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
+#endif
 
 #ifdef CONFIG_NAND_BOOT
 #define CONFIG_SPL_PAD_TO              0x20000         /* block aligned */
@@ -198,6 +216,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (640 << 10)
 #endif
 
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
+#define CONFIG_SYS_NO_FLASH
+#endif
+
 /*
  * QIXIS Definitions
  */
@@ -212,7 +236,14 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_SHIFT              0
 #define QIXIS_LBMAP_DFLTBANK           0x00
 #define QIXIS_LBMAP_ALTBANK            0x04
-#define QIXIS_RST_CTL_RESET            0x44
+#define QIXIS_LBMAP_NAND               0x09
+#define QIXIS_LBMAP_SD                 0x00
+#define QIXIS_LBMAP_SD_QSPI            0xff
+#define QIXIS_LBMAP_QSPI               0xff
+#define QIXIS_RCW_SRC_NAND             0x106
+#define QIXIS_RCW_SRC_SD               0x040
+#define QIXIS_RCW_SRC_QSPI             0x045
+#define QIXIS_RST_CTL_RESET            0x41
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START  0x21
 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE  0x08
@@ -338,22 +369,34 @@ unsigned long get_board_ddr_clk(void);
 #define VDD_MV_MIN                     819
 #define VDD_MV_MAX                     1212
 
+/* QSPI device */
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#define CONFIG_FSL_QSPI
+#ifdef CONFIG_FSL_QSPI
+#define CONFIG_SPI_FLASH_SPANSION
+#define FSL_QSPI_FLASH_SIZE            (1 << 24)
+#define FSL_QSPI_FLASH_NUM             2
+#endif
+#endif
+
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_MAX_CONTROLLER_COUNT                3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
+#endif
+
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_PROMPT              "=> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_PBSIZE              \
                (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
@@ -388,6 +431,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
+#define CONFIG_ENV_OFFSET              0x100000        /* 1MB */
+#define CONFIG_ENV_SECT_SIZE           0x10000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
@@ -395,10 +443,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SIZE                        0x20000
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_MII
 #define CONFIG_CMDLINE_TAG
 
+#include <asm/fsl_secure_boot.h>
+
 #endif /* __LS1043AQDS_H__ */