config: Move CONFIG_BOARD_LATE_INIT to defconfigs

[people/ms/u-boot.git] / include / configs / ls1043ardb.h

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 3fa9b3b611eebd888ae43ad3e7afc8150e0d272f..4519ca9fcba204efb811caa991bf49f26fd2fe0c 100644 (file)
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -9,9 +9,6 @@
 
 #include "ls1043a_common.h"
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_TEXT_BASE           0x82000000
 #else
@@ -27,7 +24,7 @@
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 /* Physical Memory Map */
 #define CONFIG_CHIP_SELECTS_PER_CTRL   4
-#define CONFIG_NR_DRAM_BANKS           1
+#define CONFIG_NR_DRAM_BANKS           2
 
 #define CONFIG_SYS_SPD_BUS_NUM         0
 
@@ -222,16 +219,6 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
-/* DSPI */
-#define CONFIG_FSL_DSPI
-#ifdef CONFIG_FSL_DSPI
-#define CONFIG_CMD_SF
-#define CONFIG_DM_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SF_DEFAULT_BUS          1
-#define CONFIG_SF_DEFAULT_CS           0
-#endif
-
 /*
  * Environment
  */
@@ -256,7 +243,6 @@
 /* FMan */
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_FMAN_ENET
-#define CONFIG_CMD_MII
 #define CONFIG_PHYLIB
 #define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
@@ -264,6 +250,7 @@
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #define CONFIG_PHY_AQUANTIA
+#define AQR105_IRQ_MASK                        0x40000000
 
 #define RGMII_PHY1_ADDR                        0x1
 #define RGMII_PHY2_ADDR                        0x2
@@ -278,4 +265,44 @@
 #define CONFIG_ETHPRIME                        "FM1@DTSEC3"
 #endif
 
+/* QE */
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+       !defined(CONFIG_QSPI_BOOT)
+#define CONFIG_U_QE
+#endif
+#define CONFIG_SYS_QE_FW_ADDR     0x60600000
+
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_MAX_CONTROLLER_COUNT                3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
+#endif
+
+/* SATA */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_CMD_SCSI
+#ifndef CONFIG_CMD_FAT
+#define CONFIG_CMD_FAT
+#endif
+#ifndef CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT2
+#endif
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID            2
+#define CONFIG_SYS_SCSI_MAX_LUN                        2
+#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+                                               CONFIG_SYS_SCSI_MAX_LUN)
+#define SCSI_VEND_ID 0x1b4b
+#define SCSI_DEV_ID  0x9170
+#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_GPT
+
+#include <asm/fsl_secure_boot.h>
+
 #endif /* __LS1043ARDB_H__ */