usb: host: Move CONFIG_XHCI_FSL to Kconfig

[people/ms/u-boot.git] / include / configs / ls1046aqds.h

diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 476387d5ad4a471a93456579a233938feef0648f..7778f86881b4679193423d6140c281fe41442fc5 100644 (file)
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -12,7 +12,7 @@
 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_TEXT_BASE           0x82000000
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_TEXT_BASE           0x40010000
+#define CONFIG_SYS_TEXT_BASE           0x40100000
 #else
 #define CONFIG_SYS_TEXT_BASE           0x60100000
 #endif
@@ -70,7 +70,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_FMAN_ENET
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #define CONFIG_PHYLIB_10G
@@ -138,22 +137,12 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* USB */
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_HCD
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif
 
 /* SATA */
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -255,7 +244,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (256 * 1024)
 #endif
@@ -425,21 +413,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_MISC_INIT_R
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_PBSIZE              \
-               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 #define CONFIG_SYS_HZ                  1000
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (30 * 1024)
-
 #define CONFIG_SYS_INIT_SP_OFFSET \
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
@@ -451,28 +430,25 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_NAND_BOOT
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_OFFSET              (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET              (1024 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
 #elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x100000        /* 1MB */
+#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x10000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x20000
 #endif
 
 #define CONFIG_CMDLINE_TAG
 
+#undef CONFIG_BOOTCOMMAND
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_BOOTCOMMAND             "sf probe && sf read $kernel_load "    \
                                        "e0000 f00000 && bootm $kernel_load"