Merge git://git.denx.de/u-boot-fsl-qoriq

[people/ms/u-boot.git] / include / configs / ls1046ardb.h

diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 0168f96462fb6a9cbe42f5430a486cf66ccf4661..3d3dfb1f8f70ae1a4531d13f82fca81cc9279981 100644 (file)
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -34,7 +34,9 @@
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 #define CONFIG_FSL_DDR_BIST    /* enable built-in memory test */
+#ifndef CONFIG_SPL
 #define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
@@ -49,16 +51,14 @@
 #endif
 #endif
 
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
+#ifndef SPL_NO_IFC
 /* IFC */
 #define CONFIG_FSL_IFC
-
 /*
  * NAND Flash Definitions
  */
 #define CONFIG_NAND_FSL_IFC
+#endif
 
 #define CONFIG_SYS_NAND_BASE           0x7e800000
 #define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
@@ -95,7 +95,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
@@ -162,31 +161,34 @@
 /*
  * Environment
  */
+#ifndef SPL_NO_ENV
 #define CONFIG_ENV_OVERWRITE
+#endif
 
 #if defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
-#define CONFIG_ENV_OFFSET              (1024 * 1024)
+#define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
 #define CONFIG_ENV_SIZE                        0x2000
 #else
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x200000        /* 2MB */
+#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x40000         /* 256KB */
 #endif
 
+#define AQR105_IRQ_MASK                        0x80000000
 /* FMan */
-#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
+#ifndef SPL_NO_FMAN
+
+#ifdef CONFIG_NET
 #define CONFIG_PHYLIB
-#define CONFIG_PHYLIB_10G
 #define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
-
 #define CONFIG_PHY_REALTEK
-#define CONFIG_PHY_AQUANTIA
-#define AQR105_IRQ_MASK                        0x80000000
+#endif
 
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHY_AQUANTIA
+#define CONFIG_PHYLIB_10G
 #define RGMII_PHY1_ADDR                        0x1
 #define RGMII_PHY2_ADDR                        0x2
 
@@ -198,31 +200,34 @@
 #define CONFIG_ETHPRIME                        "FM1@DTSEC3"
 #endif
 
+#endif
+
 /* QSPI device */
+#ifndef SPL_NO_QSPI
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_SPI_FLASH_SPANSION
 #define FSL_QSPI_FLASH_SIZE            (1 << 26)
 #define FSL_QSPI_FLASH_NUM             2
-#define CONFIG_SPI_FLASH_BAR
+#endif
 #endif
 
 /* USB */
+#ifndef SPL_NO_USB
 #define CONFIG_HAS_FSL_XHCI_USB
 #ifdef CONFIG_HAS_FSL_XHCI_USB
 #define CONFIG_USB_XHCI_HCD
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_XHCI_DWC3
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_CMD_USB
 #define CONFIG_USB_STORAGE
 #endif
+#endif
 
 /* SATA */
+#ifndef SPL_NO_SATA
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SCSI
 
 #define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
 
@@ -230,14 +235,18 @@
 #define CONFIG_SYS_SCSI_MAX_LUN                        1
 #define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                                CONFIG_SYS_SCSI_MAX_LUN)
+#endif
 
-#define CONFIG_BOOTCOMMAND             "sf probe 0:0;sf read $kernel_load" \
-                                       "$kernel_start $kernel_size;" \
-                                       "bootm $kernel_load"
-
+#ifndef SPL_NO_MISC
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \
+                          "&& esbc_halt; run qspi_bootcmd;"
 #define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
                        "15m(u-boot),48m(kernel.itb);" \
                        "7e800000.flash:16m(nand_uboot)," \
                        "48m(nand_kernel),448m(nand_free)"
+#endif
+
+#include <asm/fsl_secure_boot.h>
 
 #endif /* __LS1046ARDB_H__ */