Remove config_distro_defaults.h

[people/ms/u-boot.git] / include / configs / ls1088aqds.h

diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index e7e3afefd9a8fbd2d5912f93112d2a3fc4998f54..897a0497bb7eb3f657b94e858e6407e3f57f5ff8 100644 (file)
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -21,7 +21,6 @@ unsigned long get_board_ddr_clk(void);
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x40000
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
@@ -171,9 +170,13 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_DFLTBANK           0x0e
 #define QIXIS_LBMAP_ALTBANK            0x2e
 #define QIXIS_LBMAP_SD                 0x00
+#define QIXIS_LBMAP_EMMC               0x00
+#define QIXIS_LBMAP_IFC                        0x00
 #define QIXIS_LBMAP_SD_QSPI            0x0e
 #define QIXIS_LBMAP_QSPI               0x0e
+#define QIXIS_RCW_SRC_IFC              0x25
 #define QIXIS_RCW_SRC_SD               0x40
+#define QIXIS_RCW_SRC_EMMC             0x41
 #define QIXIS_RCW_SRC_QSPI             0x62
 #define QIXIS_RST_CTL_RESET            0x41
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE   0x20
@@ -280,6 +283,33 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_MUX_CH_DEFAULT             0x8
 #define I2C_MUX_CH5                    0xD
 
+#define I2C_MUX_CH_VOL_MONITOR          0xA
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR           0x63
+#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+#define I2C_SVDD_MONITOR_ADDR           0x4F
+
+#define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
+#define CONFIG_VID
+
+/* The lowest and highest voltage allowed for LS1088AQDS */
+#define VDD_MV_MIN                     819
+#define VDD_MV_MAX                     1212
+
+#define CONFIG_VOL_MONITOR_LTC3882_SET
+#define CONFIG_VOL_MONITOR_LTC3882_READ
+
+/* PM Bus commands code for LTC3882*/
+#define PMBUS_CMD_PAGE                  0x0
+#define PMBUS_CMD_READ_VOUT             0x8B
+#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
+#define PMBUS_CMD_VOUT_COMMAND          0x21
+
+#define PWM_CHANNEL0                    0x0
+
 /*
 * RTC configuration
 */
@@ -444,8 +474,6 @@ unsigned long get_board_ddr_clk(void);
 
 #endif
 
-#undef CONFIG_CMDLINE_EDITING
-#include <config_distro_defaults.h>
 #define BOOT_TARGET_DEVICES(func) \
        func(USB, usb, 0) \
        func(MMC, mmc, 0) \