Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / ls2080a_common.h

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 4ba273aeef0f875e2cec9db9518f08c1093bcc00..edf954dadd7b602e1b4c332563693098ca903372 100644 (file)
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright 2017 NXP
  * Copyright (C) 2014 Freescale Semiconductor
  *
  * SPDX-License-Identifier:    GPL-2.0+
@@ -13,7 +14,7 @@
 #define CONFIG_GICV3
 #define CONFIG_FSL_TZPC_BP147
 
-#include <asm/arch/ls2080a_stream_id.h>
+#include <asm/arch/stream_id_lsch3.h>
 #include <asm/arch/config.h>
 
 /* Link Definitions */
@@ -23,14 +24,11 @@
 
 /* Link Definitions */
 #ifndef CONFIG_QSPI_BOOT
-#ifdef CONFIG_SPL
-#define CONFIG_SYS_TEXT_BASE           0x80400000
 #else
-#define CONFIG_SYS_TEXT_BASE           0x30100000
+#define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
+#define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
+#define CONFIG_ENV_SECT_SIZE           0x40000
 #endif
-#endif
-
-#define CONFIG_SUPPORT_RAW_INITRD
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -91,7 +89,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /* IFC */
@@ -141,7 +138,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_NAND_BASE_PHYS              0x30000000
 
 /* MC firmware */
-#define CONFIG_FSL_MC_ENET
 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */
 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH            0x20000
 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET    0x00F00000
@@ -151,6 +147,11 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH   0x200000
 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET  0x07000000
 
+/* Define phy_reset function to boot the MC based on mcinitcmd.
+ * This happens late enough to properly fixup u-boot env MAC addresses.
+ */
+#define CONFIG_RESET_PHY_R
+
 /*
  * Carve out a DDR region which will not be used by u-boot/Linux
  *
@@ -159,11 +160,9 @@ unsigned long long get_qixis_addr(void);
  */
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE           (512UL * 1024 * 1024)
-#define CONFIG_SYS_MC_RSV_MEM_ALIGN                    (512UL * 1024 * 1024)
 #endif
 
 /* Command line configuration */
-#define CONFIG_CMD_ENV
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
@@ -189,54 +188,45 @@ unsigned long long get_qixis_addr(void);
        "ramdisk_size=0x2000000\0"              \
        "fdt_high=0xa0000000\0"                 \
        "initrd_high=0xffffffffffffffff\0"      \
-       "kernel_start=0x581200000\0"            \
+       "kernel_start=0x581000000\0"            \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
        "console=ttyAMA0,38400n8\0"             \
-       "mcinitcmd=fsl_mc start mc 0x580300000" \
-       " 0x580800000 \0"
-
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/ram0 " \
-                               "earlycon=uart8250,mmio,0x21c0500 " \
-                               "ramdisk_size=0x2000000 default_hugepagesz=2m" \
-                               " hugepagesz=2m hugepages=256"
-#define CONFIG_BOOTCOMMAND     "fsl_mc apply dpl 0x580700000 &&" \
+       "mcinitcmd=fsl_mc start mc 0x580a00000" \
+       " 0x580e00000 \0"
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_BOOTCOMMAND     "mmc read 0x80200000 0x6800 0x800;"\
+                               " fsl_mc apply dpl 0x80200000 &&" \
+                               " mmc read $kernel_load $kernel_start" \
+                               " $kernel_size && bootm $kernel_load"
+#else
+#define CONFIG_BOOTCOMMAND     "fsl_mc apply dpl 0x580d00000 &&" \
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
+#endif
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING         1
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
-
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE            0x16000
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE           0x1800a000
 
+#ifdef CONFIG_NAND_BOOT
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x80400000
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_NAND_U_BOOT_DST
+#endif
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-#define CONFIG_SYS_MONITOR_LEN         (640 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (1024 * 1024)
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
+#include <asm/arch/soc.h>
 
 #endif /* __LS2_COMMON_H */