Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / ls2080a_common.h

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index dbca05a3f6278a94bc8194df71175f9ea3367bab..edf954dadd7b602e1b4c332563693098ca903372 100644 (file)
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -24,21 +24,12 @@
 
 /* Link Definitions */
 #ifndef CONFIG_QSPI_BOOT
-#ifdef CONFIG_SPL
-#define CONFIG_SYS_TEXT_BASE           0x80400000
 #else
-#define CONFIG_SYS_TEXT_BASE           0x30100000
-#endif
-#else
-#define CONFIG_SYS_TEXT_BASE           0x20100000
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
-#define CONFIG_ENV_SECT_SIZE           0x10000
+#define CONFIG_ENV_SECT_SIZE           0x40000
 #endif
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 #ifndef CONFIG_SPL
@@ -204,10 +195,6 @@ unsigned long long get_qixis_addr(void);
        "mcinitcmd=fsl_mc start mc 0x580a00000" \
        " 0x580e00000 \0"
 
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/ram0 " \
-                               "earlycon=uart8250,mmio,0x21c0500 " \
-                               "ramdisk_size=0x2000000 default_hugepagesz=2m" \
-                               " hugepagesz=2m hugepages=256"
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_BOOTCOMMAND     "mmc read 0x80200000 0x6800 0x800;"\
                                " fsl_mc apply dpl 0x80200000 &&" \
@@ -221,20 +208,10 @@ unsigned long long get_qixis_addr(void);
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING         1
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
-
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_MAX_SIZE            0x16000
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
@@ -246,7 +223,7 @@ unsigned long long get_qixis_addr(void);
 #endif
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-#define CONFIG_SYS_MONITOR_LEN         (640 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (1024 * 1024)
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */