Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / ls2080ardb.h

diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 86a49a5cd8e7487fac1444edc42a0fd1a1e592e8..2e0d95efd744bf841bf8eb10d95500dfebf4c1be 100644 (file)
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -12,8 +12,6 @@
 #undef CONFIG_CONS_INDEX
 #define CONFIG_CONS_INDEX       2
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define I2C_MUX_CH_VOL_MONITOR         0xa
 #define I2C_VOL_MONITOR_ADDR           0x38
 #define CONFIG_VOL_MONITOR_IR36021_READ
@@ -34,7 +32,6 @@
 unsigned long get_board_sys_clk(void);
 #endif
 
-#define CONFIG_SYS_FSL_CLK
 #define CONFIG_SYS_CLK_FREQ            get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ            133333333
 #define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ/4)
@@ -63,8 +60,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA1                       AHCI_BASE_ADDR1
 #define CONFIG_SYS_SATA2                       AHCI_BASE_ADDR2
@@ -104,7 +99,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_NOR_FTIM3   0x04000000
 #define CONFIG_SYS_IFC_CCR     0x01000000
 
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
@@ -271,6 +266,7 @@ unsigned long get_board_sys_clk(void);
 #ifdef CONFIG_FSL_DSPI
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_STMICRO
 #endif
 
 /*
@@ -279,11 +275,9 @@ unsigned long get_board_sys_clk(void);
 #define RTC
 #define CONFIG_RTC_DS3231               1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
-#define CONFIG_CMD_DATE
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM      0
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
@@ -292,22 +286,16 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 
 #define CONFIG_FSL_MEMAC
-#define CONFIG_PCI             /* Enable PCIE */
-#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 
 #ifdef CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
 
 /*  MMC  */
-#define CONFIG_MMC
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 #define CONFIG_MISC_INIT_R
@@ -319,12 +307,51 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_USB_XHCI_FSL
 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_USB_STORAGE
+
+#undef CONFIG_CMDLINE_EDITING
+#include <config_distro_defaults.h>
+
+#define BOOT_TARGET_DEVICES(func) \
+       func(USB, usb, 0) \
+       func(MMC, mmc, 0) \
+       func(SCSI, scsi, 0) \
+       func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+       "scriptaddr=0x80800000\0"               \
+       "kernel_addr_r=0x81000000\0"            \
+       "pxefile_addr_r=0x81000000\0"           \
+       "fdt_addr_r=0x88000000\0"               \
+       "ramdisk_addr_r=0x89000000\0"           \
+       "loadaddr=0x80100000\0"                 \
+       "kernel_addr=0x100000\0"                \
+       "ramdisk_addr=0x800000\0"               \
+       "ramdisk_size=0x2000000\0"              \
+       "fdt_high=0xa0000000\0"                 \
+       "initrd_high=0xffffffffffffffff\0"      \
+       "kernel_start=0x581100000\0"            \
+       "kernel_load=0xa0000000\0"              \
+       "kernel_size=0x2800000\0"               \
+       "mcmemsize=0x40000000\0"                \
+       "fdtfile=fsl-ls2080a-rdb.dtb\0"         \
+       "mcinitcmd=esbc_validate 0x580c80000;"  \
+       "esbc_validate 0x580cc0000;"            \
+       "fsl_mc start mc 0x580300000"           \
+       " 0x580800000 \0"                       \
+       BOOTENV
+#else
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
+       "scriptaddr=0x80800000\0"               \
+       "kernel_addr_r=0x81000000\0"            \
+       "pxefile_addr_r=0x81000000\0"           \
+       "fdt_addr_r=0x88000000\0"               \
+       "ramdisk_addr_r=0x89000000\0"           \
        "loadaddr=0x80100000\0"                 \
        "kernel_addr=0x100000\0"                \
        "ramdisk_addr=0x800000\0"               \
@@ -334,8 +361,13 @@ unsigned long get_board_sys_clk(void);
        "kernel_start=0x581100000\0"            \
        "kernel_load=0xa0000000\0"              \
        "kernel_size=0x2800000\0"               \
-       "mcinitcmd=fsl_mc start mc 0x580300000" \
-       " 0x580800000 \0"
+       "mcmemsize=0x40000000\0"                \
+       "fdtfile=fsl-ls2080a-rdb.dtb\0"         \
+       "mcinitcmd=fsl_mc start mc 0x580300000" \
+       " 0x580800000 \0"                       \
+       BOOTENV
+#endif
+
 
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTARGS                "console=ttyS1,115200 root=/dev/ram0 " \
@@ -343,6 +375,13 @@ unsigned long get_board_sys_clk(void);
                                "ramdisk_size=0x2000000 default_hugepagesz=2m" \
                                " hugepagesz=2m hugepages=256"
 
+#undef CONFIG_BOOTCOMMAND
+/* Try to boot an on-NOR kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \
+                          " && cp.b $kernel_start $kernel_load $kernel_size" \
+                          " && bootm $kernel_load" \
+                          " || run distro_bootcmd"
+
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_PHYLIB_10G