board/ls2085a: Add support of NOR and NAND flash for simulator

[people/ms/u-boot.git] / include / configs / ls2085a_common.h

diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index 2bd5a472b37f07f2c1ee6d991c8a6160d2d5c3e3..6355e4a6b0a064ef3e1ae2e3b213c70374eaeb25 100644 (file)
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -17,7 +17,9 @@
 /* Link Definitions */
 #define CONFIG_SYS_TEXT_BASE           0x30000000
 
+#ifdef CONFIG_EMU
 #define CONFIG_SYS_NO_FLASH
+#endif
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
@@ -118,6 +120,66 @@
 #define CONFIG_SYS_NOR_FTIM3   0x04000000
 #define CONFIG_SYS_IFC_CCR     0x01000000
 
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS     45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST    { CONFIG_SYS_FLASH_BASE }
+#endif
+
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_MAX_ECCPOS     256
+#define CONFIG_SYS_NAND_MAX_OOBFREE    2
+#define CONFIG_SYS_NAND_BASE           0x520000000
+#define CONFIG_SYS_NAND_BASE_PHYS      0x20000000
+
+#define CONFIG_SYS_NAND_CSPR_EXT       (0x0)
+#define CONFIG_SYS_NAND_CSPR   (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+                               | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+                               | CSPR_MSEL_NAND        /* MSEL = NAND */ \
+                               | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK  IFC_AMASK(64 * 1024)
+
+#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
+                               | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
+                               | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
+                               | CSOR_NAND_RAL_3       /* RAL = 2Byes */ \
+                               | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
+                               | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+                               | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0          (FTIM0_NAND_TCCST(0x07) | \
+                                       FTIM0_NAND_TWP(0x18)   | \
+                                       FTIM0_NAND_TWCHT(0x07) | \
+                                       FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1          (FTIM1_NAND_TADLE(0x32) | \
+                                       FTIM1_NAND_TWBE(0x39)  | \
+                                       FTIM1_NAND_TRR(0x0e)   | \
+                                       FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2          (FTIM2_NAND_TRAD(0x0f) | \
+                                       FTIM2_NAND_TREH(0x0a) | \
+                                       FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3          0x0
+
+#define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
+
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NOR0_CSPR_EARLY
 #define CONFIG_SYS_CSPR0_FINAL         CONFIG_SYS_NOR0_CSPR