configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / m28evk.h

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 5c209913e544e01ff713c1ee98c15d7e3acf638e..bd141fa4aa272660ca9c19cf3dd512f53c5c5ab0 100644 (file)
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -9,47 +9,13 @@
 
 /* System configurations */
 #define CONFIG_MX28                            /* i.MX28 SoC */
-#define MACH_TYPE_M28EVK       3613
 #define CONFIG_MACH_TYPE       MACH_TYPE_M28EVK
 
-#define CONFIG_FIT
-
 #define CONFIG_TIMESTAMP               /* Print image info with timestamp */
 
 /* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FAT_WRITE
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define        CONFIG_VIDEO
-
-#define CONFIG_REGEX                   /* Enable regular expression support */
 
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
@@ -70,11 +36,6 @@
 #define CONFIG_ENV_OFFSET_REDUND       \
                (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT                 "nand0=gpmi-nand"
@@ -95,12 +56,6 @@
 #define CONFIG_FEC_MXC
 #endif
 
-/* EEPROM */
-#ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#endif
-
 /* RTC */
 #ifdef CONFIG_CMD_DATE
 /* Use the internal RTC in the MXS chip */
@@ -119,7 +74,6 @@
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* SPI */
@@ -130,8 +84,6 @@
 
 /* SPI FLASH */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SF_DEFAULT_BUS          2
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED                40000000
@@ -149,7 +101,6 @@
 #ifdef CONFIG_VIDEO
 #define        CONFIG_VIDEO_LOGO
 #define        CONFIG_SPLASH_SCREEN
-#define        CONFIG_CMD_BMP
 #define        CONFIG_BMP_16BPP
 #define        CONFIG_VIDEO_BMP_RLE8
 #define        CONFIG_VIDEO_BMP_GZIP
@@ -157,7 +108,6 @@
 #endif
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTFILE                "fitImage"
 #define CONFIG_BOOTARGS                "console=ttyAMA0,115200n8 "
 #define CONFIG_BOOTCOMMAND     "run mmc_mmc"