#define CONFIG_MACH_TYPE MACH_TYPE_MCX
-#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
-
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap.h>
* Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
* and older u-boot.bin with the new U-Boot SPL.
*/
-#define CONFIG_SYS_TEXT_BASE 0x80008000
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
/* EHCI */
#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
/* commands to include */
-#define CONFIG_CMD_NAND /* NAND support */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_MTDPARTS
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
-#define CONFIG_SYS_I2C_OMAP34XX
/* RTC */
#define CONFIG_RTC_DS1337
#define CONFIG_BOOTFILE "uImage"
/* Setup MTD for NAND on the SOM */
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(MLO)," \
- "1m(u-boot),256k(env1)," \
- "256k(env2),6m(kernel),6m(k_recovery)," \
- "8m(fs_recovery),-(common_data)"
#define CONFIG_HOSTNAME mcx
#define CONFIG_EXTRA_ENV_SETTINGS \
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command */
- /* args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
/* memtest works on */
*/
/* **** PISMO SUPPORT *** */
-#define CONFIG_NAND
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
-#define CONFIG_ENV_IS_IN_NAND
-#define SMNAND_ENV_OFFSET 0x180000 /* environment starts here */
/* Redundant Environment */
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET 0x180000
+#define CONFIG_ENV_ADDR 0x180000
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
2 * CONFIG_SYS_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_NAND_BASE
#define CONFIG_SPL_NAND_DRIVERS
#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */