#include "../board/xilinx/microblaze-generic/xparameters.h"
/* MicroBlaze CPU */
-#define CONFIG_MICROBLAZE 1
#define MICROBLAZE_V5 1
-/* Open Firmware DTS */
-#define CONFIG_OF_CONTROL 1
-#define CONFIG_OF_EMBED 1
-#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic
-
/* linear and spi flash memory */
#ifdef XILINX_FLASH_START
#define FLASH
# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
-# define CONFIG_SYS_NS16550 1
# define CONFIG_SYS_NS16550_SERIAL
# if defined(__MICROBLAZEEL__)
# define CONFIG_SYS_NS16550_REG_SIZE -4
# define CONFIG_XILINX_TB_WATCHDOG
#endif
-/*
- * memory layout - Example
- * CONFIG_SYS_TEXT_BASE = 0x1200_0000; defined in config.mk
- * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
- * CONFIG_SYS_SRAM_SIZE = 0x0400_0000; 64MB
- *
- * CONFIG_SYS_MONITOR_LEN = 0x40000
- * CONFIG_SYS_MALLOC_LEN = 3 * CONFIG_SYS_MONITOR_LEN = 0xC0000
- *
- * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
- * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - CONFIG_SYS_MONITOR_LEN = 0x13FB_F000
- * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - CONFIG_SYS_MALLOC_LEN = 0x13EF_F000
- *
- * 0x1000_0000 CONFIG_SYS_SDRAM_BASE
- * MEMTEST_AREA 64kB
- * FREE
- * 0x1200_0000 CONFIG_SYS_TEXT_BASE
- * U-BOOT code
- * 0x1202_0000
- * FREE
- *
- * STACK
- * 0x13EF_F000 CONFIG_SYS_MALLOC_BASE
- * MALLOC_AREA 768kB Alloc
- * 0x13FB_F000 CONFIG_SYS_MONITOR_BASE
- * MONITOR_CODE 256kB Env
- * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
- * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
- */
-
+#if !defined(CONFIG_OF_CONTROL) || \
+ (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_OF_CONTROL))
/* ddr sdram - main memory */
-#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
-#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-/* global pointer */
-/* start of global data */
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_SDRAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/* monitor code */
-#define SIZE 0x40000
-#define CONFIG_SYS_MONITOR_LEN SIZE
-#define CONFIG_SYS_MONITOR_BASE \
- (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
- - CONFIG_SYS_MONITOR_LEN - GENERATED_BD_INFO_SIZE)
-#define CONFIG_SYS_MONITOR_END \
- (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MALLOC_LEN (SIZE * 3)
-#define CONFIG_SYS_MALLOC_BASE \
- (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-
-/* stack */
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE
+# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
+# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN 0xC0000
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_SYS_MALLOC_F_LEN 1024
+#else
+# define CONFIG_SYS_MALLOC_SIMPLE
+# define CONFIG_SYS_MALLOC_F_LEN 0x150
+#endif
+
+/* Stack location before relocation */
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_TEXT_BASE
/*
* CFI flash memory layout - Example
# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR
# define CONFIG_XILINX_SPI 1
# define CONFIG_SPI 1
-# define CONFIG_SPI_FLASH 1
# define CONFIG_SPI_FLASH_STMICRO 1
# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
/*
* Command line configuration.
*/
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_GPIO
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
# define CONFIG_CMD_CACHE
# undef CONFIG_CMD_CACHE
#endif
-#ifndef CONFIG_SYS_ENET
-# undef CONFIG_CMD_NET
-# undef CONFIG_CMD_NFS
-#else
+#ifdef CONFIG_SYS_ENET
# define CONFIG_CMD_PING
# define CONFIG_CMD_DHCP
# define CONFIG_CMD_TFTPPUT
#endif
#if defined(FLASH)
-# define CONFIG_CMD_ECHO
-# define CONFIG_CMD_FLASH
-# define CONFIG_CMD_IMLS
# define CONFIG_CMD_JFFS2
# define CONFIG_CMD_UBI
# undef CONFIG_CMD_UBIFS
# if !defined(RAMENV)
-# define CONFIG_CMD_SAVEENV
# define CONFIG_CMD_SAVES
# endif
# define CONFIG_CMD_SF
# if !defined(RAMENV)
-# define CONFIG_CMD_SAVEENV
# define CONFIG_CMD_SAVES
# endif
#else
-# undef CONFIG_CMD_IMLS
-# undef CONFIG_CMD_FLASH
# undef CONFIG_CMD_JFFS2
# undef CONFIG_CMD_UBI
# undef CONFIG_CMD_UBIFS
"1m(cramfs),-(jffs2)"
#endif
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
/* size of console buffer */
#define CONFIG_SYS_CBSIZE 512
/* print buffer size */
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
/* architecture dependent code */
#define CONFIG_SYS_USR_EXCEP /* user exception */
#endif
/* SPL part */
-#define CONFIG_SPL
#define CONFIG_CMD_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
#define CONFIG_SPL_RAM_DEVICE
-#define CONFIG_SPL_NOR_SUPPORT
+#ifdef CONFIG_SYS_FLASH_BASE
+# define CONFIG_SPL_NOR_SUPPORT
+# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
+#endif
/* for booting directly linux */
#define CONFIG_SPL_OS_BOOT
/* BRAM start */
#define CONFIG_SYS_INIT_RAM_ADDR 0x0
/* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
-/* Stack pointer prior relocation, must situated at on-chip RAM */
-#define CONFIG_SYS_SPL_MALLOC_END (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100
-
-/*
- * The main reason to do it in this way is that MALLOC_START
- * can't be defined - common/spl/spl.c
- */
-#if (CONFIG_SYS_SPL_MALLOC_SIZE != 0)
-# define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_SPL_MALLOC_END - \
- CONFIG_SYS_SPL_MALLOC_SIZE)
-# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_START
-#else
-# define CONFIG_SPL_STACK_ADDR CONFIG_SYS_SPL_MALLOC_END
-#endif
+# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ CONFIG_SYS_MALLOC_F_LEN)
/* Just for sure that there is a space for stack */
#define CONFIG_SPL_STACK_SIZE 0x100
-#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
CONFIG_SYS_INIT_RAM_ADDR - \
- GENERATED_GBL_DATA_SIZE - \
- CONFIG_SYS_SPL_MALLOC_SIZE - \
+ CONFIG_SYS_MALLOC_F_LEN - \
CONFIG_SPL_STACK_SIZE)
#endif /* __CONFIG_H */
projects / people / ms / u-boot.git / blobdiff