drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / mpc5121ads.h

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 7de245b33cb51c04c01c61c9bc07ed05993902b6..3fc65667afd7f3a7854af054b9c439d5ce92f41f 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -12,6 +12,7 @@
 #define __CONFIG_H
 
 #define CONFIG_MPC5121ADS 1
+
 /*
  * Memory map for the MPC5121ADS board:
  *
@@ -35,11 +36,7 @@
 /* video */
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_IMMR + 0x2100)
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #endif
@@ -50,7 +47,6 @@
 #define CONFIG_SYS_MPC512X_CLKIN       66000000        /* in Hz */
 #else
 #define CONFIG_SYS_MPC512X_CLKIN       33333333        /* in Hz */
-#define CONFIG_PCI
 #endif
 
 #define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f() */
@@ -289,10 +285,6 @@
 #define CONSOLE_FIFO_RX_ADDR   FIFOC_PSC3_RX_ADDR
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
 
 /*
  * Clocks in use
@@ -334,7 +326,6 @@
 #define CONFIG_SYS_PCI_IO_PHYS         0x84000000
 #define CONFIG_SYS_PCI_IO_SIZE         0x01000000      /* 16M */
 
-
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
@@ -381,7 +372,6 @@
 /*
  * USB  Support
  */
-#define CONFIG_CMD_USB
 
 #if defined(CONFIG_CMD_USB)
 #define CONFIG_USB_EHCI                                /* Enable EHCI Support  */
@@ -389,7 +379,6 @@
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN            /* With big-endian regs */
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
 #endif
 
 /*
@@ -412,19 +401,10 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #undef CONFIG_CMD_FUSE
@@ -459,14 +439,12 @@
                                                "1m(u-boot);"           \
                                        "mpc5121.nand:-(data)"
 
-
 #if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
 
-#define CONFIG_CMD_FAT
 #define CONFIG_SUPPORT_VFAT
 
 #endif /* defined(CONFIG_CMD_IDE) */
@@ -492,7 +470,6 @@
        #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 #endif
 
-
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
@@ -532,7 +509,6 @@
 
 #define CONFIG_LOADADDR                400000  /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY       5       /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                        /* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE                115200
@@ -587,8 +563,6 @@
 
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
 #define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES     1
 
 #define OF_CPU                 "PowerPC,5121@0"