Convert CONFIG_CMD_JFFS2 to Kconfig

[people/ms/u-boot.git] / include / configs / mpc5121ads.h

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 3cdd0dcf62dea5be47c00f52bac24314b33f5479..e11a0e628a0be9e622a91a055cd11db0027e4f3a 100644 (file)
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -12,7 +12,6 @@
 #define __CONFIG_H
 
 #define CONFIG_MPC5121ADS 1
-#define CONFIG_DISPLAY_BOARDINFO
 
 /*
  * Memory map for the MPC5121ADS board:
@@ -37,11 +36,6 @@
 /* video */
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_IMMR + 0x2100)
-#define CONFIG_VIDEO
-#define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #endif
@@ -52,10 +46,8 @@
 #define CONFIG_SYS_MPC512X_CLKIN       66000000        /* in Hz */
 #else
 #define CONFIG_SYS_MPC512X_CLKIN       33333333        /* in Hz */
-#define CONFIG_PCI
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F              /* call board_early_init_f() */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR                0x80000000
@@ -281,7 +273,6 @@
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
-#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
@@ -332,34 +323,15 @@
 #define CONFIG_SYS_PCI_IO_PHYS         0x84000000
 #define CONFIG_SYS_PCI_IO_SIZE         0x01000000      /* 16M */
 
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 
 #endif
 
-/* I2C */
-#define CONFIG_HARD_I2C                        /* I2C with hardware support */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#if 0
-#define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}      /* Don't probe these addrs */
-#endif
-
 /*
  * IIM - IC Identification Module
  */
 #undef CONFIG_FSL_IIM
 
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2       /* 16-bit EEPROM address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x50    /* Atmel: AT24C32A-10TQ-2.7 */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* 10ms of delay */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      5       /* 32-Byte Page Write Mode */
-
 /*
  * Ethernet configuration
  */
@@ -380,12 +352,10 @@
  */
 
 #if defined(CONFIG_CMD_USB)
-#define CONFIG_USB_EHCI                                /* Enable EHCI Support  */
 #define CONFIG_USB_EHCI_FSL                    /* On a FSL platform    */
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN            /* With big-endian regs */
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
 #endif
 
 /*
@@ -408,14 +378,8 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_REGINFO
 
-#undef CONFIG_CMD_FUSE
-
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
 #endif
@@ -446,15 +410,10 @@
                                                "1m(u-boot);"           \
                                        "mpc5121.nand:-(data)"
 
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION
-
+#if defined(CONFIG_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
 #define CONFIG_SUPPORT_VFAT
 
-#endif /* defined(CONFIG_CMD_IDE) */
+#endif /* defined(CONFIG_IDE) */
 
 /*
  * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
@@ -518,8 +477,6 @@
 
 #undef  CONFIG_BOOTARGS                        /* the boot command will set bootargs */
 
-#define CONFIG_BAUDRATE                115200
-
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
        "echo"