Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / munices.h

diff --git a/include/configs/munices.h b/include/configs/munices.h
index 97330d564010f5248a2331156c127d2155e3419a..a1305b14041ff837d8c73b2e3f75e53e9c984807 100644 (file)
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2007
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -27,8 +11,7 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU) */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU */
 #define CONFIG_MPC5200_DDR     1       /* (with DDR-SDRAM) */
 #define CONFIG_MUNICES         1       /* ... on MUNICes board */
 
@@ -43,12 +26,8 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
@@ -117,9 +96,8 @@
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
 /* Use SRAM until RAM will be available */
 #define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END        MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
@@ -183,7 +161,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size  */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)     /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
@@ -193,7 +170,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x00f00000      /* 1 ... 15 MB in DRAM  */
 
 #define CONFIG_SYS_LOAD_ADDR           0x200000        /* default load address */
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
 
 #define CONFIG_DISPLAY_BOARDINFO 1
 #define CONFIG_CMDLINE_EDITING  1
@@ -209,7 +185,6 @@
 #define CONFIG_SYS_RESET_ADDRESS       0xff000000
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
 #define OF_CPU                 "PowerPC,5200@0"