cmd: add Kconfig option for 'date' command

[people/ms/u-boot.git] / include / configs / mx28evk.h

diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 9b9124ac14101d8835a0e42013b400b0f244bd8e..fac26fb2f2310f9e3a0bdfe31fe0b35c6359c4da 100644 (file)
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -16,30 +16,9 @@
 #define CONFIG_MACH_TYPE       MACH_TYPE_MX28EVK
 
 /* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
 
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_VIDEO
 
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
@@ -48,7 +27,11 @@
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
 
 /* Environment */
+#ifndef CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        (16 * 1024)
+#else
+#define CONFIG_ENV_SIZE                        (4 * 1024)
+#endif
 #define CONFIG_ENV_OVERWRITE
 
 /* Environment is in MMC */
@@ -70,7 +53,6 @@
 /* Environemnt is in SPI flash */
 #if defined(CONFIG_CMD_SF) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SIZE                        0x1000          /* 4KB */
 #define CONFIG_ENV_OFFSET              0x40000         /* 256K */
 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_ENV_SECT_SIZE           0x1000
@@ -82,7 +64,6 @@
 
 /* UBI and NAND partitioning */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_RBTREE
@@ -104,7 +85,6 @@
 /* FEC Ethernet on SoC */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_NET_MULTI
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
 #endif
 
@@ -117,7 +97,6 @@
 #ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        1
-#define        CONFIG_USB_STORAGE
 #define        CONFIG_USB_HOST_ETHER
 #define        CONFIG_USB_ETHER_ASIX
 #define        CONFIG_USB_ETHER_SMSC95XX
@@ -130,11 +109,9 @@
 
 /* SPI Flash */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
 #define CONFIG_SF_DEFAULT_BUS          2
 #define CONFIG_SF_DEFAULT_CS           0
 /* this may vary and depends on the installed chip */
-#define CONFIG_SPI_FLASH_SST
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED                24000000
 #endif
@@ -145,7 +122,6 @@
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_GZIP
@@ -153,7 +129,6 @@
 #endif
 
 /* Boot Linux */
-#define CONFIG_BOOTDELAY       1
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_LOADADDR                0x42000000
 #define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR