cmd: add Kconfig option for 'date' command

[people/ms/u-boot.git] / include / configs / mx35pdk.h

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index ab481441b296d45a60509e5bd6cc68fa0476a8ef..79d92bb06ad38f20ced5f4688cea2c4cdd5310c6 100644 (file)
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -16,17 +16,13 @@
 #include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
-#define CONFIG_ARM1136 /* This is an arm1136 CPU core */
 #define CONFIG_MX35
 
-#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_FSL_CLK
 
 /* Set TEXT at the beginning of the NOR flash */
 #define CONFIG_SYS_TEXT_BASE   0xA0000000
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
 #define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -42,10 +38,12 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 
-
 /*
  * PMIC Configs
  */
@@ -71,41 +69,18 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_BAUDRATE                115200
 
 /*
  * Command definition
  */
-
-#include <config_cmd_default.h>
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_DNS
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
 
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_NET_RETRY_COUNT 100
-#define CONFIG_CMD_DATE
-
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 
-#define CONFIG_BOOTDELAY       1
 
 #define CONFIG_LOADADDR                0x80800000      /* loadaddr env var */
 
@@ -135,20 +110,15 @@
  */
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0       /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x10000
 
-#undef CONFIG_SYS_CLKS_IN_HZ   /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 /*
@@ -241,8 +211,6 @@
 #define CONFIG_MXC_USB_PORTSC  (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
 
 /* mmc driver */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1