]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - include/configs/mx53smd.h
Move CONFIG_OF_LIBFDT to Kconfig
[people/ms/u-boot.git] / include / configs / mx53smd.h
index a04db3ff450b5e22aadf0ee6150ca95a19434fe9..33d2163d6bf8b05fc5311c508f313cfe9bb7dad1 100644 (file)
@@ -3,20 +3,7 @@
  *
  * Configuration settings for the MX53SMD Freescale board.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -24,8 +11,6 @@
 
 #define CONFIG_MX53
 
-#define CONFIG_SYS_MX5_HCLK    24000000
-#define CONFIG_SYS_MX5_CLK32           32768
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -36,6 +21,9 @@
 #define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_FSL_CLK
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX53_PORT2
-#define CONFIG_SYS_I2C_SPEED            100000
-#define CONFIG_SYS_I2C_SLAVE            0xfe
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
@@ -68,7 +56,6 @@
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
 #define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE   FEC_BASE_ADDR
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /* Command definition */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_IMLS
-
 #define CONFIG_BOOTDELAY       3
 
 #define CONFIG_ETHPRIME                "FEC0"
                "dhcp ${uimage}; bootm\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_PROMPT              "MX53SMD U-Boot > "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ          1000
 #define CONFIG_CMDLINE_EDITING
 
-/* Stack sizes */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS   2
 #define PHYS_SDRAM_1           CSD0_BASE_ADDR
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
-#define CONFIG_OF_LIBFDT
-
 #endif                         /* __CONFIG_H */