configs: Re-sync with cmd/Kconfig

[people/ms/u-boot.git] / include / configs / mx6sabre_common.h

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 98eb0427aa5c5e3ebcfb86c2a6814c58f72893ce..1ee880d9df9ba39b6633f7e9aaee9148769f2722 100644 (file)
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -24,9 +24,6 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -37,9 +34,7 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-#define CONFIG_CMD_SF
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
@@ -80,6 +75,10 @@
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
        "console=" CONFIG_CONSOLE_DEV "\0" \
+       "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
+       "dfu_alt_info_spl=spl raw 0x400\0" \
+       "dfu_alt_info_img=u-boot raw 0x10000\0" \
+       "dfu_alt_info=spl raw 0x400\0" \
        "fdt_high=0xffffffff\0"   \
        "initrd_high=0xffffffff\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
@@ -154,6 +153,8 @@
                                        "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
                                "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
                                        "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
+                               "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
+                                       "setenv fdt_file imx6qp-sabresd.dtb; fi; " \
                                "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
                                        "setenv fdt_file imx6q-sabresd.dtb; fi; " \
                                "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
@@ -162,7 +163,6 @@
                                        "echo WARNING: Could not determine dtb to use; fi; " \
                        "fi;\0" \
 
-
 #define CONFIG_BOOTCOMMAND \
        "run findfdt;" \
        "mmc dev ${mmcdev};" \
@@ -204,7 +204,7 @@
 #define CONFIG_ENV_IS_IN_MMC
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_ENV_OFFSET              (8 * 64 * 1024)
+#define CONFIG_ENV_OFFSET              (768 * 1024)
 #endif
 
 /* Framebuffer */
@@ -220,24 +220,29 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
+#ifdef CONFIG_MX6DL
+#define CONFIG_IPUV3_CLK 198000000
+#else
+#define CONFIG_IPUV3_CLK 264000000
+#endif
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
 #ifndef CONFIG_SPL
-#define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
 
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
 
-#define CONFIG_G_DNL_VENDOR_NUM                0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM       0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER      "FSL"
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
+
+/* USB Device Firmware Update support */
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_MMC
+#define CONFIG_DFU_SF
 #endif
 
 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */