usb: net: migrate USB Ethernet adapters to Kconfig

[people/ms/u-boot.git] / include / configs / mx6slevk.h

diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index d53e41653dd0dc153b1300826ac3acda09af256e..25c83e81c5f3f9fd5f93123ba634475975fb07d5 100644 (file)
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -12,19 +12,14 @@
 #include "mx6_common.h"
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"
 #endif
 
-#define MACH_TYPE_MX6SLEVK             4307
-#define CONFIG_MACH_TYPE               MACH_TYPE_MX6SLEVK
+#define CONFIG_MACH_TYPE               MACH_TYPE_MX6SL_EVK
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_IPS_BASE_ADDR
 
@@ -32,26 +27,18 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED             100000
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RMII
 #define CONFIG_FEC_MXC_PHYADDR         0
 
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -132,12 +119,9 @@
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + SZ_512M)
 
-#define CONFIG_STACKSIZE               SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                        SZ_1G
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -151,8 +135,7 @@
 /* Environment organization */
 #define CONFIG_ENV_SIZE                        SZ_8K
 
-#if defined CONFIG_SYS_BOOT_SPINOR
-#define CONFIG_ENV_IS_IN_SPI_FLASH
+#if defined CONFIG_SPI_BOOT
 #define CONFIG_ENV_OFFSET               (768 * 1024)
 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
@@ -161,7 +144,6 @@
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 #else
 #define CONFIG_ENV_OFFSET              (8 * SZ_64K)
-#define CONFIG_ENV_IS_IN_MMC
 #endif
 
 #ifdef CONFIG_CMD_SF
@@ -174,12 +156,7 @@
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2