Kconfig: USB: Migrate CONFIG_USB_EHCI_HCD users to Kconfig

[people/ms/u-boot.git] / include / configs / mx6sxsabreauto.h

diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h
index 2e739f966dc49f632b048328260263513b19fb8d..8809d8011f79ce7667a9c44e79cb6149af459bfa 100644 (file)
--- a/include/configs/mx6sxsabreauto.h
+++ b/include/configs/mx6sxsabreauto.h
@@ -6,19 +6,14 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #include "mx6_common.h"
 
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
@@ -100,12 +95,9 @@
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x10000)
 
-#define CONFIG_STACKSIZE               SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                        SZ_2G
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -120,20 +112,12 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC3_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED             100000
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
 /* NAND flash command */
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
@@ -151,9 +135,6 @@
 #define CONFIG_APBH_DMA_BURST8
 
 /* Network */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
@@ -167,12 +148,8 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
@@ -183,11 +160,7 @@
 
 #define CONFIG_IMX_THERMAL
 
-#define CONFIG_CMD_TIME
-
-#define CONFIG_FSL_QSPI
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
 #define CONFIG_SYS_FSL_QSPI_AHB
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
@@ -206,7 +179,4 @@
 #define CONFIG_SYS_MMC_ENV_DEV         0  /*USDHC3*/
 #endif
 
-#define CONFIG_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_WIDTH   { {0x30, 8}, {0x32, 8}, {0x34, 8} }
-
 #endif                         /* __CONFIG_H */