Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / mx6ul_14x14_evk.h

diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index eb92138cde82f83d9198fa994d712ab285dadf3a..1c1671e30f968e1f9becd200e0396d642eca7827 100644 (file)
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -8,30 +8,21 @@
 #ifndef __MX6UL_14X14_EVK_CONFIG_H
 #define __MX6UL_14X14_EVK_CONFIG_H
 
-
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 #include "mx6_common.h"
-#include <asm/imx-common/gpio.h>
+#include <asm/mach-imx/gpio.h>
 
 #define is_mx6ul_9x9_evk()     CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
 
 /* SPL options */
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (16 * SZ_1M)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
@@ -46,7 +37,6 @@
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #endif
 
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #endif
 
 /* I2C configs */
@@ -159,9 +149,6 @@
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                  1000
 
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE               SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -175,41 +162,27 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET              (8 * SZ_64K)
 #define CONFIG_SYS_MMC_ENV_DEV         1   /* USDHC2 */
 #define CONFIG_SYS_MMC_ENV_PART                0       /* user area */
 #define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
 
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_BMODE
-
 #ifndef CONFIG_SYS_DCACHE_OFF
-#define CONFIG_CMD_CACHE
 #endif
 
-#define CONFIG_FSL_QSPI
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED        40000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-#define CONFIG_SPI_FLASH_STMICRO
 #define FSL_QSPI_FLASH_NUM             1
 #define FSL_QSPI_FLASH_SIZE            SZ_32M
 #endif
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
@@ -231,25 +204,16 @@
 #define CONFIG_FEC_XCV_TYPE            RMII
 #endif
 #define CONFIG_ETHPRIME                        "FEC"
-
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 #endif
 
 #define CONFIG_IMX_THERMAL
 
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_LOGO