Kconfig: Migrate all of cmd/fastboot/Kconfig to defconfigs

[people/ms/u-boot.git] / include / configs / omap3_beagle.h

diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 9850aa6c059a99d08c229199c26343516db8d8cb..89880916e5236135a926716fb5c4a97246288d24 100644 (file)
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -35,16 +35,6 @@
 #define CONFIG_ENV_OVERWRITE
 
 /* Status LED */
-#define CONFIG_STATUS_LED              1
-#define CONFIG_BOARD_SPECIFIC_LED      1
-#define STATUS_LED_BIT                 0x01
-#define STATUS_LED_STATE               STATUS_LED_ON
-#define STATUS_LED_PERIOD              (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BIT1                        0x02
-#define STATUS_LED_STATE1              STATUS_LED_ON
-#define STATUS_LED_PERIOD1             (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_BOOT                        STATUS_LED_BIT
-#define STATUS_LED_GREEN               STATUS_LED_BIT1
 
 /* Enable Multi Bus support for I2C */
 #define CONFIG_I2C_MULTI_BUS           1
@@ -58,28 +48,16 @@
 #define CONFIG_TWL4030_USB             1
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_FUNCTION_FASTBOOT
-#define CONFIG_CMD_FASTBOOT
-#define CONFIG_ANDROID_BOOT_IMAGE
-#define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_LOAD_ADDR
-#define CONFIG_FASTBOOT_BUF_SIZE       0x07000000
 
 /* USB EHCI */
-#define CONFIG_USB_EHCI
 
-#define CONFIG_USB_EHCI_OMAP
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       147
 
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
 #define CONFIG_USB_ETHER_SMSC95XX
 
-/* GPIO banks */
-#define CONFIG_OMAP3_GPIO_5            /* GPIO128..159 is in GPIO bank 5 */
-#define CONFIG_OMAP3_GPIO_6            /* GPIO160..191 is in GPIO bank 6 */
-
 /* commands to include */
 
 #define MTDIDS_DEFAULT                 "nand0=nand"
@@ -87,9 +65,6 @@
                                        "1920k(u-boot),128k(u-boot-env),"\
                                        "4m(kernel),-(fs)"
 
-#define CONFIG_CMD_NAND                /* NAND support                 */
-#define CONFIG_CMD_LED         /* LED support                  */
-
 #define CONFIG_VIDEO_OMAP3     /* DSS Support                  */
 
 /*
@@ -267,7 +242,6 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
 
-#define CONFIG_ENV_IS_IN_NAND          1
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
 #define ONENAND_ENV_OFFSET             0x260000 /* environment starts here */
 #define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
@@ -276,8 +250,6 @@
 #define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_OMAP3_ID_NAND
 
@@ -297,9 +269,7 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS                0x240000
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x280000
-#define CONFIG_CMD_SPL_WRITE_SIZE      0x2000
 #endif
 
 #endif /* __CONFIG_H */