configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / omap3_evm.h

diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 1fcb7af9fe2128969ebee408323c8411c72a44d0..c831f366fb467c01a0458c10d9793604caff0709 100644 (file)
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -11,36 +11,20 @@
  *
  * Manikandan Pillai <mani.pillai@ti.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __OMAP3EVM_CONFIG_H
 #define __OMAP3EVM_CONFIG_H
 
 #include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 
 /* ----------------------------------------------------------------------------
- * Supported U-boot commands
+ * Supported U-Boot commands
  * ----------------------------------------------------------------------------
  */
-#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
 
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
@@ -52,17 +36,11 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
 
-#undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
-#undef CONFIG_CMD_FPGA         /* FPGA configuration Support   */
-#undef CONFIG_CMD_IMI          /* iminfo                       */
-#undef CONFIG_CMD_IMLS         /* List all found images        */
-
 /* ----------------------------------------------------------------------------
- * Supported U-boot features
+ * Supported U-Boot features
  * ----------------------------------------------------------------------------
  */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
 
 /* Display CPU and Board information */
 #define CONFIG_DISPLAY_CPUINFO
@@ -89,28 +67,28 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 /* Partition tables */
-/* Only need DOS partition support for SPL, currently */
-#ifndef CONFIG_SPL_BUILD
 #define CONFIG_EFI_PARTITION
-#endif
 #define CONFIG_DOS_PARTITION
 
 /* USB
  *
- * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
- * Enable CONFIG_MUSB_UDD for Device functionalities.
+ * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
+ * Enable CONFIG_USB_MUSB_UDD for Device functionalities.
  */
 #define CONFIG_USB_OMAP3
-#define CONFIG_MUSB_HCD
-/* #define CONFIG_MUSB_UDC */
+#define CONFIG_USB_MUSB_HCD
+/* #define CONFIG_USB_MUSB_UDC */
 
 /* NAND SPL */
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
@@ -121,6 +99,7 @@
                                                10, 11, 12, 13}
 #define CONFIG_SYS_NAND_ECCSIZE                512
 #define CONFIG_SYS_NAND_ECCBYTES       3
+#define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_HAM1_CODE_HW
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 
@@ -134,7 +113,7 @@
  * Default environment
  * -----------------------------------------------------------------------------
  */
-#define CONFIG_BOOTDELAY       10
+#define CONFIG_BOOTDELAY       3
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
@@ -160,7 +139,7 @@
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \