#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
#if defined(CONFIG_SPL_BUILD)
#undef CONFIG_SYS_NS16550_REG_SIZE
-#else /* !CONFIG_SPL_BUILD */
-#define CONFIG_SYS_NS16550_REG_SIZE (-1)
#endif /* CONFIG_SPL_BUILD */
/* NAND */
#if defined(CONFIG_NAND)
-#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_FLASH_BASE NAND_BASE
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
/* MUSB */
#define CONFIG_USB_OMAP3
-#define CONFIG_USB_MUSB_OMAP2PLUS
-#define CONFIG_USB_MUSB_PIO_ONLY
/* USB EHCI */
#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1
-/* SMSC911x Ethernet */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE 0x2C000000
-#endif /* CONFIG_CMD_NET */
-
/* Environment */
#define CONFIG_PREBOOT "usb start"
+#include <config_distro_defaults.h>
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV
+
+#if defined(CONFIG_NAND) && defined(CONFIG_CMD_UBI)
+/* NAND boot with uImage from NAND 'kernel' partition */
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "run nandboot\0"
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+
+/* NAND boot with zImage from UBIFS '/boot/zImage' */
+#define BOOTENV_DEV_UBIFS_NAND(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "run nandbootubifs\0"
+#define BOOTENV_DEV_NAME_UBIFS_NAND(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+#endif /* CONFIG_NAND && CONFIG_CMD_UBI */
+
+/* MMC boot with uImage from MMC 0:2 '/boot/uImage' */
+#define BOOTENV_DEV_UIMAGE_MMC(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "setenv mmcdev " #instance"; " \
+ "run mmcboot\0"
+#define BOOTENV_DEV_NAME_UIMAGE_MMC(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+
+/* MMC boot with zImage from MMC 0:2 '/boot/zImage' */
+#define BOOTENV_DEV_ZIMAGE_MMC(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "setenv mmcdev " #instance"; " \
+ "run mmcbootz\0"
+#define BOOTENV_DEV_NAME_ZIMAGE_MMC(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(ZIMAGE_MMC, zimage_mmc, 0) \
+ func(UIMAGE_MMC, uimage_mmc, 0) \
+ func(UBIFS_NAND, ubifs_nand, 0) \
+ func(NAND, nand, 0)
+
+#include <config_distro_bootcmd.h>
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
+ MEM_LAYOUT_ENV_SETTINGS \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+ "fdt_high=0xffffffff\0" \
+ "bootdir=/boot\0" \
"bootenv=uEnv.txt\0" \
"optargs=\0" \
"mmcdev=0\0" \
+ "mmcpart=2\0" \
"console=ttyO0,115200n8\0" \
"mmcargs=setenv bootargs console=${console} " \
"${mtdparts} " \
"root=ubi0:rootfs rw ubi.mtd=rootfs noinitrd " \
"rootfstype=ubifs rootwait\0" \
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "ext4bootenv=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t ${loadaddr} ${filesize}\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source ${loadaddr}\0" \
- "loaduimage=setenv bootfile uImage; " \
- "fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
- "loadzimage=setenv bootfile zImage; " \
- "fatload mmc ${mmcdev} ${loadaddr} zImage\0" \
- "loaddtb=fatload mmc ${mmcdev} ${fdtaddr} " CONFIG_DEFAULT_FDT_FILE "\0" \
- "mmcboot=echo Booting ${bootfile} from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr} - ${fdtaddr}\0" \
- "mmcbootz=echo Booting ${bootfile} from mmc ...; " \
- "run mmcargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
- "nandboot=echo Booting uImage from nand ...; " \
- "run nandargs; " \
- "nand read ${loadaddr} kernel; " \
- "nand read ${fdtaddr} dtb; " \
- "bootm ${loadaddr} - ${fdtaddr}\0"
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootenv; then " \
- "run importbootenv; " \
+ "mmcbootenv=mmc dev ${mmcdev}; " \
+ "if mmc rescan; then " \
+ "run loadbootenv && run importbootenv; " \
+ "run ext4bootenv && run importbootenv; " \
"if test -n $uenvcmd; then " \
"echo Running uenvcmd ...; " \
"run uenvcmd; " \
"fi; " \
- "else " \
- "if run loadzimage && run loaddtb; then " \
- "run mmcbootz; fi; " \
- "if run loaduimage && run loaddtb; then " \
- "run mmcboot; fi; " \
- "run nandboot; " \
- "fi; " \
- "else run nandboot; fi"
+ "fi\0" \
+ "loaduimage=setenv bootfile uImage; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadzimage=setenv bootfile zImage; " \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loaddtb=ext4load mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "loadubizimage=setenv bootfile zImage; " \
+ "ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \
+ "loadubidtb=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "mmcboot=run mmcbootenv; " \
+ "if run loaduimage && run loaddtb; then " \
+ "echo Booting ${bootdir}/${bootfile} from mmc ${mmcdev}:${mmcpart} ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr} - ${fdtaddr}; " \
+ "fi\0" \
+ "mmcbootz=run mmcbootenv; " \
+ "if run loadzimage && run loaddtb; then " \
+ "echo Booting ${bootdir}/${bootfile} from mmc ${mmcdev}:${mmcpart} ...; " \
+ "run mmcargs; " \
+ "bootz ${loadaddr} - ${fdtaddr}; " \
+ "fi\0" \
+ "nandboot=" \
+ "nand read ${loadaddr} kernel; " \
+ "nand read ${fdtaddr} dtb; " \
+ "echo Booting uImage from NAND MTD 'kernel' partition ...; " \
+ "run nandargs; " \
+ "bootm ${loadaddr} - ${fdtaddr}\0" \
+ "nandbootubifs=" \
+ "ubi part rootfs; " \
+ "ubifsmount ubi0:rootfs; " \
+ "if run loadubizimage && run loadubidtb; then " \
+ "echo Booting ${bootdir}/${bootfile} from NAND ubi0:rootfs ...; " \
+ "run nandargs; " \
+ "bootz ${loadaddr} - ${fdtaddr}; " \
+ "fi\0" \
+ BOOTENV
#endif /* __CONFIG_H */