configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / omap3_overo.h

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 53ff61d10c1f3d655508a4b7ff0f7c1c844e234a..950b91a4d94f23f8e785c3347de98bb41ed74d2f 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -11,17 +11,15 @@
 #define CONFIG_NAND
 
 #include <configs/ti_omap3_common.h>
-#undef CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_MAX_SIZE    (64*1024)
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
+ */
 #undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE   0x40200000
+#define CONFIG_SPL_TEXT_BASE           0x40200000
 
 #define CONFIG_BCH
 
-/* Display CPU and Board information */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* call misc_init_r */
 #define CONFIG_MISC_INIT_R
 
@@ -42,30 +40,12 @@
 #define CONFIG_TWL4030_LED
 
 /* USB EHCI */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_OMAP
-#define CONFIG_USB_STORAGE
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO       183
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
 
-/* Initialize GPIOs by default */
-#define CONFIG_OMAP3_GPIO_2    /* GPIO32..63 is in GPIO Bank 2 */
-#define CONFIG_OMAP3_GPIO_3    /* GPIO64..95 is in GPIO Bank 3 */
-#define CONFIG_OMAP3_GPIO_4    /* GPIO96..127 is in GPIO Bank 4 */
-#define CONFIG_OMAP3_GPIO_5    /* GPIO128..159 is in GPIO Bank 5 */
-#define CONFIG_OMAP3_GPIO_6    /* GPIO160..191 is in GPIO Bank 6 */
-
 /* commands to include */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_USB
 
 #ifdef CONFIG_NAND
-#define CONFIG_CMD_UBI         /* UBI-formated MTD partition support */
-#define CONFIG_CMD_UBIFS       /* Read-only UBI volume operations */
-
-#define CONFIG_RBTREE          /* required by CONFIG_CMD_UBI */
-#define CONFIG_LZO             /* required by CONFIG_CMD_UBIFS */
-
 #define CONFIG_MTD_PARTITIONS  /* required for UBI partition support */
 
 /* NAND block size is 128 KiB.  Synchronize these values with
@@ -88,7 +68,6 @@
 #endif /* CONFIG_NAND */
 
 /* Board NAND Info. */
-#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
 /* Environment information */
@@ -218,7 +197,6 @@
 /* Initial RAM setup */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE       0x800
-#define CONFIG_SYS_CACHELINE_SIZE      64
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT