configs: Re-sync with cmd/Kconfig

[people/ms/u-boot.git] / include / configs / omapl138_lcdk.h

diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 91a74138c5525aada83158c0aa499a5e45549b61..f3287e3ad3ce4ffd095ca2a60009514d360b6fad 100644 (file)
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -5,19 +5,7 @@
  *
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * SPDX-License-Identifier:    GPL-2.0
  */
 
 #ifndef __CONFIG_H
@@ -93,7 +81,6 @@
 /*
  * Serial Driver info
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    -4      /* NS16550 register size */
 #define CONFIG_SYS_NS16550_COM1        DAVINCI_UART2_BASE /* Base address of UART2 */
@@ -103,9 +90,6 @@
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
 #define CONFIG_DAVINCI_SPI
 #define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
@@ -196,11 +180,9 @@
 /*
  * U-Boot general configuration
  */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_MISC_INIT_R
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOOTFILE                "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT      "U-Boot > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define CONFIG_SYS_MAXARGS     16 /* max number of command args */
@@ -208,13 +190,10 @@
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
 #define CONFIG_VERSION_VARIABLE
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CRC32_VERIFY
 #define CONFIG_MX_CYCLIC
-#define CONFIG_OF_LIBFDT
 
 /*
  * Linux Information
@@ -230,28 +209,17 @@
 /*
  * U-Boot commands
  */
-#include <config_cmd_default.h>
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MEMORY
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS
 #endif
 
 #ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
 #endif
 
 #ifdef CONFIG_USE_NAND
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
 #define CONFIG_CMD_NAND
 
 #define CONFIG_CMD_MTDPARTS
@@ -264,11 +232,6 @@
 #endif
 
 #ifdef CONFIG_USE_SPIFLASH
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SAVEENV
 #endif
 
 #if !defined(CONFIG_USE_NAND) && \
@@ -277,7 +240,6 @@
 #define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_SIZE                (16 << 10)
-#undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_ENV
 #endif
 
@@ -288,9 +250,6 @@
 
 #ifdef CONFIG_MMC
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
 #undef CONFIG_ENV_IS_IN_MMC
 #endif