Merge git://git.denx.de/u-boot-spi

[people/ms/u-boot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 638e9da0283bdd9edbd133ecafc411ae7c4a7a96..07c192aecc1d216934e5892f26ae332d9dfe858e 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -72,11 +72,7 @@
  */
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=ec000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
-                       "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
 #endif
 
 #if defined(CONFIG_TARGET_P1021RDB)
@@ -98,19 +94,7 @@
  */
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
-#ifdef CONFIG_PHYS_64BIT
-#define MTDIDS_DEFAULT "nor0=fef000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
-                       "256k(dtb),4608k(kernel),9728k(fs)," \
-                       "256k(qe-ucode-firmware),1280k(u-boot)"
-#else
-#define MTDIDS_DEFAULT "nor0=ef000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
-                       "256k(dtb),4608k(kernel),9728k(fs)," \
-                       "256k(qe-ucode-firmware),1280k(u-boot)"
-#endif
 #endif
 
 #if defined(CONFIG_TARGET_P1024RDB)
@@ -157,17 +141,7 @@
  */
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
-#ifdef CONFIG_PHYS_64BIT
-#define MTDIDS_DEFAULT "nor0=fef000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
-                       "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
-#else
-#define MTDIDS_DEFAULT "nor0=ef000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
-                       "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
-#endif
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -270,10 +244,7 @@
 #define CONFIG_TSEC_ENET       /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_CMD_SATA
-#define CONFIG_SATA_SIL
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
 
 #if defined(CONFIG_TARGET_P2020RDB)
@@ -434,7 +405,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_CMD_NAND
 #if defined(CONFIG_TARGET_P1020RDB_PD)
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 #else
@@ -631,7 +601,6 @@
 #define CONFIG_SYS_I2C_PCA9557_ADDR    0x18
 
 /* enable read and write access to EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
@@ -692,8 +661,6 @@
 #endif
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
-#define CONFIG_CMD_PCI
-
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif /* CONFIG_PCI */
 
@@ -720,8 +687,6 @@
 
 #define CONFIG_ETHPRIME        "eTSEC1"
 
-#define CONFIG_PHY_GIGE        1       /* Include GbE speed/duplex detection */
-
 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
@@ -774,7 +739,6 @@
  * Environment
  */
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS     0
 #define CONFIG_ENV_SPI_CS      0
 #define CONFIG_ENV_SPI_MAX_HZ  10000000
@@ -783,7 +747,6 @@
 #define CONFIG_ENV_OFFSET      0x100000        /* 1MB */
 #define CONFIG_ENV_SECT_SIZE   0x10000
 #elif defined(CONFIG_SDCARD)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_SYS_MMC_ENV_DEV 0
@@ -794,15 +757,12 @@
 #else
 #define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
 #endif
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET      (1024 * 1024)
 #define CONFIG_ENV_RANGE       (3 * CONFIG_ENV_SIZE)
 #elif defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_ENV_IS_NOWHERE  /* Store ENV in memory only */
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - 0x1000)
 #define CONFIG_ENV_SIZE                0x2000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
@@ -811,12 +771,6 @@
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
 /*
  * USB
  */
@@ -826,6 +780,7 @@
 #ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
 #endif
 #endif
 
@@ -846,15 +801,6 @@
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-       /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -879,8 +825,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR        1000000
 
-#define CONFIG_BOOTARGS        /* the boot command will set bootargs */
-
 #ifdef __SW_BOOT_NOR
 #define __NOR_RST_CMD  \
 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \