configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / p1_p2_rdb_pc.h

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 185df775aa00e38f381046bede4e0773ef4d5218..15b81644067869077a06ac914fe994a4dc17c167 100644 (file)
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -10,7 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_36BIT
@@ -41,7 +40,6 @@
 #define CONFIG_BOARDNAME "P1020RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1020
-#define CONFIG_SPI_FLASH
 #define CONFIG_VSC7385_ENET
 #define CONFIG_SLIC
 #define __SW_BOOT_MASK         0x03
@@ -70,7 +68,6 @@
 #define CONFIG_BOARDNAME "P1020RDB-PD"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1020
-#define CONFIG_SPI_FLASH
 #define CONFIG_VSC7385_ENET
 #define CONFIG_SLIC
 #define __SW_BOOT_MASK         0x03
@@ -80,6 +77,16 @@
 #define __SW_BOOT_NAND         0x44
 #define __SW_BOOT_PCIE         0x74
 #define CONFIG_SYS_L2_SIZE     (256 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=ec000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
+                       "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
 #endif
 
 #if defined(CONFIG_P1021RDB)
@@ -87,7 +94,6 @@
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1021
 #define CONFIG_QE
-#define CONFIG_SPI_FLASH
 #define CONFIG_VSC7385_ENET
 #define CONFIG_SYS_LBC_LBCR    0x00080000      /* Implement conversion of
                                                addresses in the LBC */
@@ -98,6 +104,24 @@
 #define __SW_BOOT_NAND         0xec
 #define __SW_BOOT_PCIE         0x6c
 #define CONFIG_SYS_L2_SIZE     (256 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#ifdef CONFIG_PHYS_64BIT
+#define MTDIDS_DEFAULT "nor0=fef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
+                       "256k(dtb),4608k(kernel),9728k(fs)," \
+                       "256k(qe-ucode-firmware),1280k(u-boot)"
+#else
+#define MTDIDS_DEFAULT "nor0=ef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
+                       "256k(dtb),4608k(kernel),9728k(fs)," \
+                       "256k(qe-ucode-firmware),1280k(u-boot)"
+#endif
 #endif
 
 #if defined(CONFIG_P1024RDB)
@@ -105,7 +129,6 @@
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1024
 #define CONFIG_SLIC
-#define CONFIG_SPI_FLASH
 #define __SW_BOOT_MASK         0xf3
 #define __SW_BOOT_NOR          0x00
 #define __SW_BOOT_SPI          0x08
@@ -120,7 +143,6 @@
 #define CONFIG_P1025
 #define CONFIG_QE
 #define CONFIG_SLIC
-#define CONFIG_SPI_FLASH
 
 #define CONFIG_SYS_LBC_LBCR    0x00080000      /* Implement conversion of
                                                addresses in the LBC */
@@ -136,7 +158,6 @@
 #define CONFIG_BOARDNAME "P2020RDB-PCA"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P2020
-#define CONFIG_SPI_FLASH
 #define CONFIG_VSC7385_ENET
 #define __SW_BOOT_MASK         0x03
 #define __SW_BOOT_NOR          0xc8
@@ -145,10 +166,25 @@
 #define __SW_BOOT_NAND         0xe8
 #define __SW_BOOT_PCIE         0xa8
 #define CONFIG_SYS_L2_SIZE     (512 << 10)
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#ifdef CONFIG_PHYS_64BIT
+#define MTDIDS_DEFAULT "nor0=fef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
+                       "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
+#else
+#define MTDIDS_DEFAULT "nor0=ef000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
+                       "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
+#endif
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -177,7 +213,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -207,8 +242,6 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
@@ -454,7 +487,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #if defined(CONFIG_P1020RDB_PD)
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -617,7 +649,6 @@
  */
 #define CONFIG_CONS_INDEX              1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -631,20 +662,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -669,7 +686,6 @@
 
 /* enable read and write access to EEPROM */
 #define CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
@@ -678,10 +694,8 @@
  * eSPI - Enhanced SPI
  */
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
 
 #if defined(CONFIG_SPI_FLASH)
-#define CONFIG_SPI_FLASH_SPANSION
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED        10000000
 #define CONFIG_SF_DEFAULT_MODE 0
@@ -734,9 +748,7 @@
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
 #define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_E1000   /* Defind e1000 pci Ethernet card*/
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
@@ -859,15 +871,11 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 /*