Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / p1_twr.h

diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index 427629f409d03a0ce6fd2962db41ae07dee3d26c..e02c31db2acdba1d2154d28d44f7507b0afbcf76 100644 (file)
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -22,14 +22,9 @@
 #define CONFIG_RAMBOOT_SDCARD
 #define CONFIG_SYS_RAMBOOT
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_TEXT_BASE           0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS    0x110bfffc
 #endif
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0xeff40000
-#endif
-
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
 #endif
@@ -50,10 +45,7 @@
 #define CONFIG_TSEC_ENET       /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_CMD_SATA
-#define CONFIG_SATA_SIL3114
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
 
 #ifndef __ASSEMBLY__
@@ -72,7 +64,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x1fffffff
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
 #define CONFIG_SYS_CCSRBAR             0xffe00000
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
@@ -230,7 +221,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_PCA9555_ADDR    0x23
 
 /* enable read and write access to EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
@@ -268,8 +258,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xffc00000
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
-#define CONFIG_CMD_PCI
-
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif /* CONFIG_PCI */
 
@@ -297,8 +285,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_ETHPRIME        "eTSEC1"
 
-#define CONFIG_PHY_GIGE        1       /* Include GbE speed/duplex detection */
-
 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
 #undef CONFIG_HAS_ETH2
@@ -352,28 +338,20 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=ec000000.nor"
-#define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:256k(vsc7385-firmware)," \
-                       "256k(dtb),5632k(kernel),57856k(fs)," \
-                       "256k(qe-ucode-firmware),1280k(u-boot)"
 
 /*
  * Environment
  */
 #ifdef CONFIG_SYS_RAMBOOT
 #ifdef CONFIG_RAMBOOT_SDCARD
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_SYS_MMC_ENV_DEV 0
 #else
-#define CONFIG_ENV_IS_NOWHERE  /* Store ENV in memory only */
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - 0x1000)
 #define CONFIG_ENV_SIZE                0x2000
 #endif
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
@@ -382,12 +360,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
 /*
  * USB
  */
@@ -410,18 +382,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-       /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -442,8 +403,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR        1000000
 
-#define CONFIG_BOOTARGS        /* the boot command will set bootargs */
-
 #define        CONFIG_EXTRA_ENV_SETTINGS       \
 "netdev=eth0\0"        \
 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"    \