]> git.ipfire.org Git - people/ms/u-boot.git/blobdiff - include/configs/pcm030.h
drivers/pci/Kconfig: Add PCI
[people/ms/u-boot.git] / include / configs / pcm030.h
index 5c6188955d6a98bf184aed5b6091815791da012b..0d5217b75db7d50c4de8c2fb43dfb2e191ee4392 100644 (file)
@@ -20,8 +20,7 @@
 High Level Configuration Options
 (easy to change)
 -----------------------------------------------------------------------------*/
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU) */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU */
 #define CONFIG_MPC5200_DDR     1       /* (with DDR-SDRAM) */
 #define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */
                                        /* FEC configuration and IDE */
@@ -51,15 +50,9 @@ Serial console configuration
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 
 #define        CONFIG_TIMESTAMP        1       /* Print image info with timestamp */
@@ -74,15 +67,8 @@ Serial console configuration
 #define MTDPARTS_DEFAULT       "mtdparts=physmap-flash.0:256k(ubootl)," \
        "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
 
-/*-----------------------------------------------------------------------------
-Autobooting
------------------------------------------------------------------------------*/
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* allow stopping of boot process */
-                                       /* even with bootdelay=0 */
 #undef CONFIG_BOOTARGS
 
-
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\
                "mount root filesystem over NFS;" \
@@ -127,7 +113,6 @@ IPB Bus clocking configuration.
  * 0x40000000 - 0x4fffffff - PCI Memory
  * 0x50000000 - 0x50ffffff - PCI IO Space
  * -----------------------------------------------------------------------*/
-#define CONFIG_PCI                     1
 #define CONFIG_PCI_PNP                 1
 #define CONFIG_PCI_SCAN_SHOW           1
 #define CONFIG_PCI_MEM_BUS             0x40000000
@@ -341,7 +326,6 @@ RTC configuration
  Miscellaneous configurable options
 -------------------------------------------------------------------------------*/
 #define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
 
 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
 
@@ -365,8 +349,6 @@ RTC configuration
 
 #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
 
-#define CONFIG_DISPLAY_BOARDINFO 1
-
 /*-----------------------------------------------------------------------------
  Various low-level settings
 -----------------------------------------------------------------------------*/
@@ -420,12 +402,8 @@ RTC configuration
 
 /* USB */
 #define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT               1
-#define CONFIG_OF_BOARD_SETUP          1
-
 #define OF_CPU                         "PowerPC,5200@0"
 #define OF_TBCLK                       CONFIG_SYS_MPC5XXX_CLKIN
 #define OF_SOC                         "soc5200@f0000000"