#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
#include <asm/arch/imx-regs.h>
#define CONFIG_VF610
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SKIP_LOWLEVEL_INIT
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define LPUART_BASE UART1_BASE
-
/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_SYS_UART_PORT (1)
#define CONFIG_BAUDRATE 115200
-#undef CONFIG_CMD_IMLS
-
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_SYS_NAND_ONFI_DETECTION
#ifdef CONFIG_CMD_NAND
-#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
#define CONFIG_JFFS2_NAND
/* UBI */
-#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
+
+#ifndef MTDIDS_DEFAULT
#define MTDIDS_DEFAULT "nand0=NAND"
-#define MTDPARTS_DEFAULT "mtdparts=NAND:256k(spare)"\
- ",384k(bootloader)"\
+#endif
+
+#ifndef MTDPARTS_DEFAULT
+#define MTDPARTS_DEFAULT "mtdparts=NAND:640k(bootloader)"\
",128k(env1)"\
",128k(env2)"\
",128k(dtb)"\
",6144k(kernel)"\
- ",65536k(ramdisk)"\
- ",450944k(root)"
+ ",-(root)"
+#endif
+
#endif
-#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_ESDHC_NUM 1
/*#define CONFIG_ESDHC_DETECT_USE_EXTERN_IRQ1*/
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC135
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
-
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
+
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
/* QSPI Configs*/
#ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
#define FSL_QSPI_FLASH_SIZE (1 << 24)
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_SYS_FSL_QSPI_LE
#endif
/* I2C Configs */
-#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
#define CONFIG_SYS_I2C_EEPROM_BUS 2
-#define CONFIG_BOOTDELAY 3
#define CONFIG_LOADADDR 0x82000000
#define CONFIG_SYS_TEXT_BASE 0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT 524288
-#define CONFIG_BOOTCOMMAND "run bootcmd_sd"
+/* if no target-specific extra environment settings were defined by the
+ target, define an empty one */
+#ifndef PCM052_EXTRA_ENV_SETTINGS
+#define PCM052_EXTRA_ENV_SETTINGS
+#endif
+
+/* if no target-specific boot command was defined by the target,
+ define an empty one */
+#ifndef PCM052_BOOTCOMMAND
+#define PCM052_BOOTCOMMAND
+#endif
+
+/* if no target-specific extra environment settings were defined by the
+ target, define an empty one */
+#ifndef PCM052_NET_INIT
+#define PCM052_NET_INIT
+#endif
+
+/* boot command, including the target-defined one if any */
+#define CONFIG_BOOTCOMMAND PCM052_BOOTCOMMAND "run bootcmd_nand"
+
+/* Extra env settings (including the target-defined ones if any) */
#define CONFIG_EXTRA_ENV_SETTINGS \
+ PCM052_EXTRA_ENV_SETTINGS \
+ "autoload=no\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
- "blimg_file=u-boot.imx\0" \
- "blsec_addr=0x81000000\0" \
- "blimg_addr=0x81000400\0" \
+ "blimg_file=u-boot.vyb\0" \
+ "blimg_addr=0x81000000\0" \
"kernel_file=zImage\0" \
"kernel_addr=0x82000000\0" \
- "fdt_file=vf610-pcm052.dtb\0" \
+ "fdt_file=zImage.dtb\0" \
"fdt_addr=0x81000000\0" \
"ram_file=uRamdisk\0" \
"ram_addr=0x83000000\0" \
"tftptimeout=1000\0" \
"tftptimeoutcountmax=1000000\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
- "bootargs_base=setenv bootargs rw mem=256M " \
+ "bootargs_base=setenv bootargs rw " \
+ " mem=" __stringify(CONFIG_PCM052_DDR_SIZE) "M " \
"console=ttyLP1,115200n8\0" \
"bootargs_sd=setenv bootargs ${bootargs} " \
"root=/dev/mmcblk0p2 rootwait\0" \
"bootargs_net=setenv bootargs ${bootargs} root=/dev/nfs ip=dhcp " \
"nfsroot=${serverip}:${nfs_root},v3,tcp\0" \
"bootargs_nand=setenv bootargs ${bootargs} " \
- "ubi.mtd=6 rootfstype=ubifs root=ubi0:rootfs\0" \
+ "ubi.mtd=5 rootfstype=ubifs root=ubi0:rootfs\0" \
"bootargs_ram=setenv bootargs ${bootargs} " \
"root=/dev/ram rw initrd=${ram_addr}\0" \
"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
"nand read ${fdt_addr} dtb; " \
"nand read ${kernel_addr} kernel; " \
- "nand read ${ram_addr} ramdisk; " \
+ "nand read ${ram_addr} root; " \
"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
- "update_bootloader_from_tftp=mtdparts default; " \
- "nand read ${blsec_addr} bootloader; " \
- "mw.b ${blimg_addr} 0xff 0x5FC00; " \
- "if tftp ${blimg_addr} ${tftpdir}${blimg_file}; then " \
+ "update_bootloader_from_tftp=" PCM052_NET_INIT \
+ "if tftp ${blimg_addr} "\
+ "${tftpdir}${blimg_file}; then " \
+ "mtdparts default; " \
"nand erase.part bootloader; " \
- "nand write ${blsec_addr} bootloader ${filesize}; fi\0" \
+ "nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
"update_kernel_from_sd=if fatload mmc 0:2 ${kernel_addr} " \
"${kernel_file}; " \
"then mtdparts default; " \
"if fatload mmc 0:2 ${fdt_addr} ${fdt_file}; then " \
"nand erase.part dtb; " \
"nand write ${fdt_addr} dtb ${filesize}; fi\0" \
- "update_kernel_from_tftp=if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
+ "update_kernel_from_tftp=" PCM052_NET_INIT \
+ "if tftp ${fdt_addr} ${tftpdir}${fdt_file}; " \
"then setenv fdtsize ${filesize}; " \
"if tftp ${kernel_addr} ${tftpdir}${kernel_file}; then " \
"mtdparts default; " \
"nand write ${fdt_addr} dtb ${fdtsize}; " \
"nand erase.part kernel; " \
"nand write ${kernel_addr} kernel ${filesize}; fi; fi\0" \
- "update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \
+ "update_rootfs_from_tftp=" PCM052_NET_INIT \
+ "if tftp ${sys_addr} ${tftpdir}${filesys}; " \
"then mtdparts default; " \
"nand erase.part root; " \
"ubi part root; " \
"ubi create rootfs; " \
"ubi write ${sys_addr} rootfs ${filesize}; fi\0" \
- "update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
+ "update_ramdisk_from_tftp=" PCM052_NET_INIT \
+ "if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
"then mtdparts default; " \
- "nand erase.part ramdisk; " \
- "nand write ${ram_addr} ramdisk ${filesize}; fi\0"
+ "nand erase.part root; " \
+ "nand write ${ram_addr} root ${filesize}; fi\0"
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80010000
#define CONFIG_SYS_MEMTEST_END 0x87C00000
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
-#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
+#define PHYS_SDRAM_SIZE (CONFIG_PCM052_DDR_SIZE * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_ENV_OFFSET_REDUND 0xC0000
#endif
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
-
#endif
projects / people / ms / u-boot.git / blobdiff