#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#include "mx6_common.h"
-#include <asm/imx-common/gpio.h>
+#include <asm/mach-imx/gpio.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+/* Network support */
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET2_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x1
+#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_BOARD_EARLY_INIT_F
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART6_BASE_ADDR
#define CONFIG_FSL_USDHC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
-
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_EMMC_BOOT
/* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET
-
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
-
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER "FSL"
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER "FSL"
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
+#define DFU_DEFAULT_POLL_TIMEOUT 300
-#define CONFIG_DEFAULT_FDT_FILE "imx6ul-pico-hobbit.dtb"
+#define CONFIG_DFU_ENV_SETTINGS \
+ "dfu_alt_info=uboot raw 0x2 0x400 mmcpart 1;" \
+ "boot part 0 1;" \
+ "/zImage ext4 0 1;" \
+ "/imx6ul-pico-hobbit.dtb ext4 0 1;" \
+ "rootfs part 0 2\0" \
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
"fdt_addr=0x83000000\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcautodetect=yes\0" \
+ CONFIG_DFU_ENV_SETTINGS \
+ "finduuid=part uuid mmc 0:2 uuid\0" \
+ "partitions=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=boot,size=16MiB;name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \
+ "setup_emmc=gpt write mmc 0 $partitions; reset;\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "root=PARTUUID=${uuid} rootwait rw\0" \
+ "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
+ "run finduuid; " \
"run mmcargs; " \
"if run loadfdt; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"echo WARN: Cannot load the DT; " \
- "fi;\0"
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
#define CONFIG_BOOTCOMMAND \
"if mmc rescan; then " \
"fi; " \
"else run netboot; fi"
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_128M
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1
+#define CONFIG_SYS_I2C_SPEED 100000
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
+
+/* environment organization */
#define CONFIG_ENV_SIZE SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 0
-#define CONFIG_MMCROOT "/dev/mmcblk0p2"
-
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
#endif /* __PICO_IMX6UL_CONFIG_H */
projects / people / ms / u-boot.git / blobdiff