Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / pico-imx6ul.h

diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index ed3b64fd710e9fbb72bf946c0bbcb7496ba3f167..4b18b2c90b2920ca3243f1b6544650e31f49fc09 100644 (file)
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -12,10 +12,7 @@
 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>
 #include "mx6_common.h"
-#include <asm/imx-common/gpio.h>
-
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
+#include <asm/mach-imx/gpio.h>
 
 /* Network support */
 
@@ -24,14 +21,10 @@
 #define IMX_FEC_BASE                   ENET2_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR         0x1
 #define CONFIG_FEC_XCV_TYPE            RMII
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (35 * SZ_1M) /* Increase due to DFU */
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART6_BASE_ADDR
 
@@ -39,15 +32,9 @@
 #define CONFIG_FSL_USDHC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
-
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_EMMC_BOOT
 
 /* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
@@ -55,13 +42,15 @@
 
 #define CONFIG_USBD_HS
 
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
-
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
 #define DFU_DEFAULT_POLL_TIMEOUT 300
 
-#define CONFIG_DEFAULT_FDT_FILE                "imx6ul-pico-hobbit.dtb"
+#define CONFIG_DFU_ENV_SETTINGS \
+       "dfu_alt_info=uboot raw 0x2 0x400 mmcpart 1;" \
+               "boot part 0 1;" \
+               "/zImage ext4 0 1;" \
+               "/imx6ul-pico-hobbit.dtb ext4 0 1;" \
+               "rootfs part 0 2\0" \
 
 #define CONFIG_SYS_MMC_IMG_LOAD_PART   1
 
@@ -74,14 +63,19 @@
        "fdt_addr=0x83000000\0" \
        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
        "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
        "mmcautodetect=yes\0" \
-       "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
+       CONFIG_DFU_ENV_SETTINGS \
+       "finduuid=part uuid mmc 0:2 uuid\0" \
+       "partitions=" \
+               "uuid_disk=${uuid_gpt_disk};" \
+               "name=boot,size=16MiB;name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \
+       "setup_emmc=gpt write mmc 0 $partitions; reset;\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
-               "root=${mmcroot}\0" \
-       "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-       "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+               "root=PARTUUID=${uuid} rootwait rw\0" \
+       "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+       "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
        "mmcboot=echo Booting from mmc ...; " \
+               "run finduuid; " \
                "run mmcargs; " \
                "if run loadfdt; then " \
                        "bootz ${loadaddr} - ${fdt_addr}; " \
@@ -127,9 +121,6 @@
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                  1000
 
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE               SZ_128K
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -155,15 +146,11 @@
 #define CONFIG_POWER_PFUZE3000
 #define CONFIG_POWER_PFUZE3000_I2C_ADDR        0x08
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET              (8 * SZ_64K)
 
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_SYS_MMC_ENV_PART                0
-#define CONFIG_MMCROOT                 "/dev/mmcblk0p2"
 
 #endif /* __PICO_IMX6UL_CONFIG_H */