flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / picosam9g45.h

diff --git a/include/configs/picosam9g45.h b/include/configs/picosam9g45.h
index 750f76a44824898066e961ae4407f278db246ad7..762308991ecd13b6cae73a7dfda4fb56ef40e7e3 100644 (file)
--- a/include/configs/picosam9g45.h
+++ b/include/configs/picosam9g45.h
@@ -30,8 +30,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
 
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
@@ -44,7 +42,6 @@
 #define        CONFIG_USART_ID                 ATMEL_ID_SYS
 
 /* LCD */
-#define CONFIG_LCD
 #define LCD_BPP                                LCD_COLOR8
 #define CONFIG_LCD_LOGO
 #undef LCD_TEST_PATTERN
@@ -53,7 +50,6 @@
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_LCD
 #define CONFIG_ATMEL_LCD_RGB565
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE            0x23E00000
 
@@ -78,9 +74,6 @@
  * Command line configuration.
  */
 
-/* No NOR flash */
-#define CONFIG_SYS_NO_FLASH
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS   2
 #define PHYS_SDRAM_1           ATMEL_BASE_CS1  /* on DDRSDRC1 */
@@ -95,15 +88,9 @@
 /* MMC */
 
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif
 
-#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -163,9 +150,6 @@
 #define CONFIG_SPL_MAX_SIZE            0x010000
 #define CONFIG_SPL_STACK               0x310000
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-
 #define CONFIG_SYS_MONITOR_LEN         0x80000
 
 #ifdef CONFIG_SYS_USE_MMC
@@ -176,8 +160,6 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00080000
 
 #define CONFIG_SPL_LDSCRIPT    arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x400
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"