flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / pm9g45.h

diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index e0c388e70c687910a6f30fa96e1d8d0aad499ecd..c3a07f7352d3bed23973e699f7b265112daf73a1 100644 (file)
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -25,7 +25,6 @@
 #define CONFIG_PM9G45          1       /* It's an Ronetix PM9G45 */
 #define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9G45"
 
-#define MACH_TYPE_PM9G45       2672
 #define CONFIG_MACH_TYPE       MACH_TYPE_PM9G45
 
 /* ARM asynchronous clock */
@@ -40,7 +39,6 @@
 #define CONFIG_INITRD_TAG      1
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
@@ -54,10 +52,9 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define        CONFIG_RED_LED          AT91_PIO_PORTD, 31 /* this is the user1 led */
-#define        CONFIG_GREEN_LED        AT91_PIO_PORTD, 0 /* this is the user2 led */
+#define CONFIG_RED_LED         GPIO_PIN_PD(31) /* this is the user1 led */
+#define CONFIG_GREEN_LED       GPIO_PIN_PD(0)  /* this is the user2 led */
 
-#define CONFIG_BOOTDELAY       3
 
 /*
  * BOOTP options
@@ -70,15 +67,7 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING                1
-#define CONFIG_CMD_DHCP                1
 #define CONFIG_CMD_NAND                1
-#define CONFIG_CMD_USB         1
 
 #define CONFIG_CMD_JFFS2               1
 #define CONFIG_JFFS2_CMDLINE           1
@@ -92,10 +81,6 @@
 #define PHYS_SDRAM                     0x70000000
 #define PHYS_SDRAM_SIZE                        0x08000000      /* 128 megs */
 
-/* NOR flash, not available */
-#define CONFIG_SYS_NO_FLASH            1
-#undef CONFIG_CMD_FLASH
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
@@ -106,8 +91,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN      AT91_PIO_PORTD, 3
+#define CONFIG_SYS_NAND_ENABLE_PIN     GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN      GPIO_PIN_PD(3)
 
 #endif
 
@@ -121,12 +106,10 @@
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 #define CONFIG_USB_OHCI_NEW            1
-#define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT   1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE  0x00700000 /* _UHP_OHCI_BASE */
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "at91sam9g45"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
-#define CONFIG_USB_STORAGE             1
 
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE    PHYS_SDRAM + 0xE00000
@@ -152,7 +135,6 @@
 
 #define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_SYS_PROMPT              "U-Boot> "
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
@@ -160,7 +142,6 @@
 #define CONFIG_SYS_LONGHELP            1
 #define CONFIG_CMDLINE_EDITING         1
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool