Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / qemu-mips64.h

diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h
index 61cafadd7cf47872cbdc026c861109ff43a6d558..382c5802b9229c0d421118d555c81adfe760ddc6 100644 (file)
--- a/include/configs/qemu-mips64.h
+++ b/include/configs/qemu-mips64.h
@@ -14,16 +14,9 @@
 
 #define CONFIG_QEMU_MIPS
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_BOOTDELAY       10      /* autoboot after 10 seconds */
-
-#define CONFIG_BAUDRATE                115200
-
 #define CONFIG_TIMESTAMP               /* Print image info with timestamp */
-#undef CONFIG_BOOTARGS
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "addmisc=setenv bootargs ${bootargs} "                          \
@@ -39,34 +32,23 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#define CONFIG_CMD_DHCP
 
 #define CONFIG_DRIVER_NE2000
 #define CONFIG_DRIVER_NE2000_BASE      0xffffffffb4000300
 
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         115200
 #define CONFIG_SYS_NS16550_COM1                0xffffffffb40003f8
 #define CONFIG_CONS_INDEX              1
 
-#define CONFIG_CMD_IDE
-#define CONFIG_DOS_PARTITION
+#ifdef CONFIG_SYS_BIG_ENDIAN
+#define CONFIG_IDE_SWAP_IO
+#endif
 
 #define CONFIG_SYS_IDE_MAXBUS          2
 #define CONFIG_SYS_ATA_IDE0_OFFSET     0x1f0
@@ -77,32 +59,11 @@
 
 #define CONFIG_SYS_IDE_MAXDEVICE       4
 
-#define CONFIG_CMD_RARP
-
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-
-/* Monitor Command Prompt */
-#if defined(CONFIG_SYS_LITTLE_ENDIAN)
-#define CONFIG_SYS_PROMPT              "qemu-mips64el # "
-#else
-#define CONFIG_SYS_PROMPT              "qemu-mips64 # "
-#endif
 
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE              256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS             16
-
-#define CONFIG_SYS_MALLOC_LEN          128*1024
+#define CONFIG_SYS_MALLOC_LEN          (256 << 10)
 
 #define CONFIG_SYS_BOOTPARAMS_LEN      128*1024
 
@@ -123,9 +84,7 @@
  * FLASH and environment organization
  */
 /* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_TEXT_BASE           0xffffffffbfc00000 /* Rom version */
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN         (192 << 10)
 
 #define CONFIG_SYS_INIT_SP_OFFSET      0x400000
 
@@ -137,23 +96,12 @@
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-
 /* Address and size of Primary Environment Sector */
 #define CONFIG_ENV_SIZE                0x8000
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
 
 #define CONFIG_ENV_OVERWRITE   1
 
 #define MEM_SIZE               128
 
-#define CONFIG_LZMA
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE         16384
-#define CONFIG_SYS_ICACHE_SIZE         16384
-#define CONFIG_SYS_CACHELINE_SIZE      32
-
 #endif /* __CONFIG_H */