Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / qemu-ppce500.h

diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h
index 0b8640223f4b07b06ea38e5699b57fcfd3bafeda..f718704068509d83474243df59f948226cc2bfd4 100644 (file)
--- a/include/configs/qemu-ppce500.h
+++ b/include/configs/qemu-ppce500.h
@@ -10,21 +10,10 @@
 #ifndef __QEMU_PPCE500_H
 #define __QEMU_PPCE500_H
 
-#define CONFIG_CMD_REGINFO
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE
-#define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_QEMU_E500
-
-#undef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xf01000 /* 15 MB */
-
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 
 #define CONFIG_SYS_RAMBOOT
 
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCI1            1       /* PCI controller 1 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
@@ -39,10 +28,8 @@
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 #define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
 /* Needed to fill the ccsrbar pointer */
-#define CONFIG_BOARD_EARLY_INIT_F
 
 /* Virtual address to CCSRBAR */
 #define CONFIG_SYS_CCSRBAR             0xe0000000
@@ -56,8 +43,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
 #endif
 
-#define CONFIG_PHYS_64BIT
-
 /* Virtual address range for PCI region maps */
 #define CONFIG_SYS_PCI_MAP_START       0x80000000
 #define CONFIG_SYS_PCI_MAP_END         0xe8000000
@@ -76,14 +61,10 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 #define CONFIG_SYS_CLK_FREQ        33000000
 
-#define CONFIG_SYS_NO_FLASH
-
 #define CONFIG_SYS_BOOT_BLOCK          0x00000000      /* boot TLB */
 
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_ENV_IS_NOWHERE
-
 #define CONFIG_HWCONFIG
 
 #define CONFIG_SYS_INIT_RAM_ADDR               0x00100000
@@ -120,14 +101,11 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_DOS_PARTITION
 #endif /* CONFIG_PCI */
 
 #define CONFIG_LBA48
-#define CONFIG_DOS_PARTITION
 
 /*
  * Environment
@@ -141,23 +119,11 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_IRQ
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -177,8 +143,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BAUDRATE        115200
-
 #define CONFIG_BOOTCOMMAND             \
        "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"