mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW

[people/ms/u-boot.git] / include / configs / rk3036_common.h

diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h
index ae4b101e444df558a26b7301ab9d202752e9f292..1fd33a067a3d9f67ae7ceaa6e997235e20843ba4 100644 (file)
--- a/include/configs/rk3036_common.h
+++ b/include/configs/rk3036_common.h
@@ -6,9 +6,8 @@
 #ifndef __CONFIG_RK3036_COMMON_H
 #define __CONFIG_RK3036_COMMON_H
 
-#define CONFIG_SYS_CACHELINE_SIZE      32
-
 #include <asm/arch/hardware.h>
+#include "rockchip-common.h"
 
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_NR_DRAM_BANKS           1
@@ -20,14 +19,11 @@
 #define CONFIG_SYS_CBSIZE              1024
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SYS_THUMB_BUILD
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_SYS_TIMER_RATE          (24 * 1000 * 1000)
 #define CONFIG_SYS_TIMER_BASE          0x200440a0 /* TIMER5 */
 #define CONFIG_SYS_TIMER_COUNTER       (CONFIG_SYS_TIMER_BASE + 8)
 
-#define CONFIG_SPL_SERIAL_SUPPORT
-
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_MEM32
 
@@ -40,15 +36,10 @@
 #define CONFIG_ROCKCHIP_MAX_INIT_SIZE  (4 << 10)
 #define CONFIG_ROCKCHIP_CHIP_TAG       "RK30"
 
-#define CONFIG_ROCKCHIP_COMMON
-
 /* MMC/SD IP block */
-#define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_DWMMC
 #define CONFIG_BOUNCE_BUFFER
 
-#define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 #define CONFIG_PARTITION_UUIDS
 #define CONFIG_CMD_PART
@@ -63,8 +54,36 @@
 #define CONFIG_SF_DEFAULT_SPEED 20000000
 
 #ifndef CONFIG_SPL_BUILD
-#include <config_distro_defaults.h>
-
+/* usb otg */
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_DWC2_OTG
+#define CONFIG_USB_GADGET_VBUS_DRAW    0
+
+/* fastboot  */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV  0
+#define CONFIG_FASTBOOT_BUF_ADDR       CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE       0x08000000
+
+/* usb mass storage */
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_G_DNL_MANUFACTURER      "Rockchip"
+#define CONFIG_G_DNL_VENDOR_NUM                0x2207
+#define CONFIG_G_DNL_PRODUCT_NUM       0x310a
+
+/* usb host */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_ASIX
+#endif
 #define ENV_MEM_LAYOUT_SETTINGS \
        "scriptaddr=0x60000000\0" \
        "pxefile_addr_r=0x60100000\0" \
@@ -72,19 +91,18 @@
        "kernel_addr_r=0x62000000\0" \
        "ramdisk_addr_r=0x64000000\0"
 
-/* First try to boot from SD (index 0), then eMMC (index 1 */
-#define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0) \
-       func(MMC, mmc, 1)
-
 #include <config_distro_bootcmd.h>
 
 /* Linux fails to load the fdt if it's loaded above 512M on a evb-rk3036 board,
  * so limit the fdt reallocation to that */
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "fdt_high=0x7fffffff\0" \
+       "partitions=" PARTS_DEFAULT \
        ENV_MEM_LAYOUT_SETTINGS \
        BOOTENV
 #endif
 
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_PREBOOT
+
 #endif