configs: Re-sync with CONFIG_DISTRO_DEFAULTS

[people/ms/u-boot.git] / include / configs / s32v234evb.h

diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
index 33ff6d5749eba73c5738f9a1086285a22d8174c9..e5b3d6c57ce0c58c8f96b9a792f89b9032db1c65 100644 (file)
--- a/include/configs/s32v234evb.h
+++ b/include/configs/s32v234evb.h
@@ -72,9 +72,6 @@
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_UART_PORT           (1)
-#define CONFIG_BAUDRATE                                115200
-
-#undef CONFIG_CMD_IMLS
 
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
@@ -87,25 +84,12 @@
 #if 0
 
 /* Ethernet config */
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE            ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE     RMII
 #define CONFIG_FEC_MXC_PHYADDR  0
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#endif
-
-#if 0                          /* Disable until the I2C driver will be updated */
-
-/* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE            I2C0_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED           100000
 #endif
 
 #if 0                          /* Disable until the FLASH will be implemented */
@@ -114,7 +98,6 @@
 
 #ifdef CONFIG_SYS_USE_NAND
 /* Nand Flash Configs */
-#define        CONFIG_CMD_NAND
 #define CONFIG_JFFS2_NAND
 #define MTD_NAND_FSL_NFC_SWECC 1
 #define CONFIG_NAND_FSL_NFC
@@ -126,9 +109,7 @@
 #endif
 
 #define CONFIG_LOADADDR                        0xC307FFC0
-#define CONFIG_BOOTARGS                        "console=ttyLF0 root=/dev/ram rw"
 
-#define CONFIG_CMD_ENV
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "boot_scripts=boot.scr.uimg boot.scr\0" \
        "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
@@ -180,11 +161,6 @@
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "=> "
 #undef CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              \
-                       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 #define CONFIG_CMDLINE_EDITING
 
 #define CONFIG_CMD_MEMTEST
@@ -194,18 +170,10 @@
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                          1000
 
-#define CONFIG_SYS_TEXT_BASE           0x3E800000      /* SDRAM */
-
 #ifdef CONFIG_RUN_FROM_IRAM_ONLY
 #define CONFIG_SYS_MALLOC_BASE         (DDR_BASE_ADDR)
 #endif
 
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE               (128 * 1024)    /* regular stack */
-
 #if 0
 /* Configure PXE */
 #define CONFIG_BOOTP_PXE
@@ -229,7 +197,6 @@
 
 /* environment organization */
 #define CONFIG_ENV_SIZE                        (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 
 #define CONFIG_ENV_OFFSET              (12 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV         0