Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / s5pc210_universal.h

diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 20985da9a0e4df6c2625369be434b0887d97f0a6..841deddbe8534d35984d53e7423febfa02ed43fd 100644 (file)
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -10,12 +10,7 @@
 #ifndef __CONFIG_UNIVERSAL_H
 #define __CONFIG_UNIVERSAL_H
 
-#include <configs/exynos4-dt.h>
-
-#define CONFIG_SYS_PROMPT      "Universal # "  /* Monitor Command Prompt */
-
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE     exynos4210-universal_c210
+#include <configs/exynos4-common.h>
 
 #define CONFIG_TIZEN                   /* TIZEN lib */
 
@@ -29,20 +24,13 @@
 
 #define SDRAM_BANK_SIZE                        (256 << 20)     /* 256 MB */
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
 /* select serial console configuration */
 #define CONFIG_SERIAL2
-#define CONFIG_BAUDRATE                        115200
 
 /* Console configuration */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
-#define CONFIG_BOOTARGS                        "Please use defined boot"
 #define CONFIG_BOOTCOMMAND             "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE         "console=ttySAC1,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE         "ttySAC1,115200n8"
 
 #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR \
                                        - GENERATED_GBL_DATA_SIZE)
@@ -56,27 +44,12 @@
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x4800000)
 
-#define CONFIG_SYS_TEXT_BASE           0x44800000
-
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 
 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
-#define MTDIDS_DEFAULT         "onenand0=samsung-onenand"
-
-#define MTDPARTS_DEFAULT       "mtdparts=samsung-onenand:"\
-                               "128k(s-boot)"\
-                               ",896k(bootloader)"\
-                               ",256k(params)"\
-                               ",2816k(config)"\
-                               ",8m(csa)"\
-                               ",7m(kernel)"\
-                               ",1m(log)"\
-                               ",12m(modem)"\
-                               ",60m(qboot)"\
-                               ",-(UBI)\0"
-
-#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+
+#define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
 
 #define MBRPARTS_DEFAULT       "20M(permanent)"\
                                ",20M(boot)"\
@@ -88,7 +61,6 @@
 #define CONFIG_BOOTBLOCK       "10"
 #define CONFIG_UBIBLOCK                "9"
 
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         CONFIG_MMC_DEFAULT_DEV
 #define CONFIG_ENV_SIZE                        4096
 #define CONFIG_ENV_OFFSET              ((32 - 4) << 10) /* 32KiB - 4KiB */
@@ -99,7 +71,6 @@
 
 #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
 
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -145,8 +116,8 @@
        "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
        "verify=n\0" \
        "rootfstype=ext4\0" \
-       "console=" CONFIG_DEFAULT_CONSOLE \
-       "mtdparts=" MTDPARTS_DEFAULT \
+       "console=" CONFIG_DEFAULT_CONSOLE "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
        "mbrparts=" MBRPARTS_DEFAULT \
        "meminfo=crashkernel=32M@0x50000000\0" \
        "nfsroot=/nfsroot/arm\0" \
@@ -163,46 +134,13 @@
 #define CONFIG_SAMSUNG_ONENAND
 #define CONFIG_SYS_ONENAND_BASE                0x0C000000
 
-#include <asm/arch/gpio.h>
-/*
- * I2C Settings
- */
-#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
-#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6
-
-#define CONFIG_CMD_I2C
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT            /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED      50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE      0
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS 7
-
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX8998
-
-#define CONFIG_USB_GADGET
-#define CONFIG_USB_GADGET_S3C_UDC_OTG
-#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_DWC2_OTG_PHY
 
 /*
  * SPI Settings
  */
 #define CONFIG_SOFT_SPI
-#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
-#define CONFIG_SOFT_SPI_GPIO_SCLK EXYNOS4_GPIO_Y31
-#define CONFIG_SOFT_SPI_GPIO_MOSI EXYNOS4_GPIO_Y33
-#define CONFIG_SOFT_SPI_GPIO_MISO EXYNOS4_GPIO_Y30
-#define CONFIG_SOFT_SPI_GPIO_CS EXYNOS4_GPIO_Y43
-
-#define SPI_DELAY udelay(1)
-#undef SPI_INIT
-#define SPI_SCL(bit) universal_spi_scl(bit)
-#define SPI_SDA(bit) universal_spi_sda(bit)
-#define SPI_READ universal_spi_read()
+
 #ifndef        __ASSEMBLY__
 void universal_spi_scl(int bit);
 void universal_spi_sda(int bit);
@@ -216,11 +154,9 @@ int universal_spi_read(void);
 
 /* Download menu - Samsung common */
 #define CONFIG_LCD_MENU
-#define CONFIG_LCD_MENU_BOARD
 
 /* Download menu - definitions for check keys */
 #ifndef __ASSEMBLY__
-#include <power/max8998_pmic.h>
 
 #define KEY_PWR_PMIC_NAME              "MAX8998_PMIC"
 #define KEY_PWR_STATUS_REG             MAX8998_REG_STATUS1
@@ -234,14 +170,10 @@ int universal_spi_read(void);
 
 /* LCD console */
 #define LCD_BPP                        LCD_COLOR16
-#define CONFIG_SYS_WHITE_ON_BLACK
 
 /*
  * LCD Settings
  */
-#define CONFIG_EXYNOS_FB
-#define CONFIG_LCD
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_LD9040
 #define CONFIG_VIDEO_BMP_GZIP