Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig

[people/ms/u-boot.git] / include / configs / sama5d3_xplained.h

diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index bfd8aa7e6c2ef7fb738cd6c3d0c5c47af8dccc63..d1881bbc4b25afc5219b3d5a4bbd1730725ac01f 100644 (file)
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -74,15 +74,12 @@
 /* Ethernet Hardware */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_MACB_SEARCH_PHY
 #define CONFIG_RGMII
-#define CONFIG_CMD_MII
 #define CONFIG_PHYLIB
 
 /* MMC */
-#define CONFIG_CMD_MMC
 
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
@@ -92,7 +89,6 @@
 #endif
 
 /* USB */
-#define CONFIG_CMD_USB
 
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
@@ -103,37 +99,18 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "SAMA5D3 Xplained"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 #define CONFIG_DOS_PARTITION
-#define CONFIG_USB_STORAGE
 #endif
 
 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
-#define CONFIG_CMD_FAT
 #define CONFIG_FAT_WRITE
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
 #endif
 
 #define CONFIG_SYS_LOAD_ADDR                   0x22000000 /* load address */
 
 #if CONFIG_SYS_USE_NANDFLASH
-/* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0xc0000
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_ENV_SIZE                        0x20000
-#define CONFIG_BOOTCOMMAND     "nand read 0x21000000 0x180000 0x80000;" \
-                               "nand read 0x22000000 0x200000 0x600000;" \
-                               "bootz 0x22000000 - 0x21000000"
+/* override the bootcmd, bootargs and other configuration for nandflash env */
 #elif CONFIG_SYS_USE_MMC
-/* bootstrap + u-boot + env in sd card */
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE      "mmc"
-#define FAT_ENV_FILE           "uboot.env"
-#define FAT_ENV_DEVICE_AND_PART        "0"
-#define CONFIG_ENV_SIZE                0x4000
-#define CONFIG_BOOTCOMMAND     "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \
-                               "fatload mmc 0:1 0x22000000 zImage; " \
-                               "bootz 0x22000000 - 0x21000000"
+/* override the bootcmd, bootargs and other configuration for sd/mmc env */
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif
@@ -147,9 +124,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x20080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SPL_BOARD_INIT
@@ -162,8 +136,6 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
 
 #elif CONFIG_SYS_USE_NANDFLASH
 #define CONFIG_SPL_NAND_SUPPORT