mx53: Add Board support for GE PPD

[people/ms/u-boot.git] / include / configs / sama5d4_xplained.h

diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index f0c80260d0d370c0a94f4082ec82d327f7204aa6..6aa4bcc5c55e10b5fbab0343915b99a74cc019f1 100644 (file)
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -12,9 +12,11 @@
 
 #include "at91-sama5_common.h"
 
+#define CONFIG_MISC_INIT_R
+
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x20000000
 
 #ifdef CONFIG_SPL_BUILD
@@ -34,7 +36,7 @@
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_BASE           0x80000000
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
@@ -45,25 +47,6 @@
 #define CONFIG_ATMEL_NAND_HW_PMECC
 #endif
 
-/* LCD */
-#ifdef CONFIG_LCD
-#define LCD_BPP                                LCD_COLOR16
-#define LCD_OUTPUT_BPP                  24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-#endif
-
-#ifdef CONFIG_SYS_USE_SERIALFLASH
-/* override the bootcmd, bootargs and other configuration for spi flash env */
-#elif CONFIG_SYS_USE_NANDFLASH
-/* override the bootcmd, bootargs and other configuration for nandflash env */
-#elif CONFIG_SYS_USE_MMC
-/* override the bootcmd, bootargs and other configuration for sd/mmc env */
-#endif
-
 /* SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE           0x200000
@@ -75,14 +58,19 @@
 
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
-#ifdef CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/armv7/u-boot-spl.lds
+#ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
 #elif CONFIG_SYS_USE_NANDFLASH
+#elif CONFIG_SPI_BOOT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
+
+#elif CONFIG_NAND_BOOT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
+#endif
 #define CONFIG_PMECC_CAP               8
 #define CONFIG_PMECC_SECTOR_SIZE       512
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
@@ -94,9 +82,4 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
-#elif CONFIG_SYS_USE_SERIALFLASH
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x10000
-
-#endif
 #endif