flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / sbc8349.h

diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index b7f83e010525eb81bd3c9f71050eb0aef932b986..dc1978b93b79cd1a615865f061a78eb5f165c446 100644 (file)
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -19,7 +19,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 Family */
-#define CONFIG_MPC83xx         1       /* MPC83xx family */
 #define CONFIG_MPC834x         1       /* MPC834x family */
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_SBC8349         1       /* WRS SBC8349 board specific */
@@ -51,8 +50,6 @@
 #endif
 #endif
 
-#undef CONFIG_BOARD_EARLY_INIT_F               /* call board_pre_init */
-
 #define CONFIG_SYS_IMMR                0xE0000000
 
 #undef CONFIG_SYS_DRAM_TEST            /* memory test, takes time */
@@ -266,7 +263,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -279,13 +275,6 @@
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -339,8 +328,6 @@
 #undef PCI_ONE_PCI1
 #endif
 
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -393,7 +380,6 @@
 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
 
 #else
-       #define CONFIG_SYS_NO_FLASH     1       /* Flash is not usable now */
        #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
        #define CONFIG_ENV_SIZE         0x2000
@@ -402,7 +388,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
 
-
 /*
  * BOOTP options
  */
@@ -411,26 +396,14 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
@@ -539,7 +512,6 @@
        HID0_ENABLE_M_BIT |\
        HID0_ENABLE_ADDRESS_BROADCAST) */
 
-
 #define CONFIG_SYS_HID2 HID2_HBE
 
 #define CONFIG_HIGH_BATS       1       /* High BATs supported */
@@ -662,7 +634,6 @@
                                /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                800000
 
-#define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE         115200