#define CONFIG_ENV_SIZE (0x2000)
#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "U-Boot# "
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_SIEMENS_MACH_TYPE
#define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE
+#endif
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SYS_CACHELINE_SIZE 64
/* commands to include */
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ECHO
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_TIME
-#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SYS_MAXARGS 32
/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE 512
+#define CONFIG_SYS_CBSIZE 1024
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
#define CONFIG_SPI
#define CONFIG_OMAP3_SPI
#define CONFIG_MTD_DEVICE
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED (75000000)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SERIAL_MULTI
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000
#define CONFIG_I2C
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED OMAP_I2C_STANDARD
+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP24XX
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x402F0400
#define CONFIG_SPL_MAX_SIZE (101 * 1024)
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_FS_FAT
*/
#define CONFIG_USB_MUSB_DSPS
#define CONFIG_ARCH_MISC_INIT
-#define CONFIG_MUSB_GADGET
-#define CONFIG_MUSB_PIO_ONLY
-#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
-#define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
-#define CONFIG_MUSB_HOST
+#define CONFIG_USB_MUSB_PIO_ONLY
+#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
+#undef CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_AM335X_USB0
#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
-#ifdef CONFIG_MUSB_HOST
+#ifdef CONFIG_USB_MUSB_HOST
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#endif
-#ifdef CONFIG_MUSB_GADGET
+#ifdef CONFIG_USB_MUSB_GADGET
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
-#endif /* CONFIG_MUSB_GADGET */
-
-#define CONFIG_USB_GADGET
-#define CONFIG_USBDOWNLOAD_GADGET
+#endif /* CONFIG_USB_MUSB_GADGET */
/* USB DRACO ID as default */
#define CONFIG_USBD_HS
-#define CONFIG_G_DNL_VENDOR_NUM 0x0908
-#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
-#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
/* USB Device Firmware Update support */
-#define CONFIG_DFU_FUNCTION
+#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_NAND
#define CONFIG_CMD_DFU
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20)
/* Unsupported features */
#undef CONFIG_USE_IRQ
-#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
#define CONFIG_NAND
/* NAND support */
#ifdef CONFIG_NAND
#define CONFIG_CMD_NAND
+
+/* UBI Support */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#endif
+
+/* Commen environment */
+#define CONFIG_PREBOOT
+#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
+ "setenv bootargs ${bootargs};" \
+ "mtdparts default;" \
+ "draco_led 1;" \
+ "dfu 0 nand 0;" \
+ "draco_led 0;\0" \
+
+#define COMMON_ENV_NAND_BOOT \
+ "nand_boot=echo Booting from nand; " \
+ "if test ${upgrade_available} -eq 1; then " \
+ "if test ${bootcount} -gt ${bootlimit}; " \
+ "then " \
+ "setenv upgrade_available 0;" \
+ "setenv ${partitionset_active} true;" \
+ "if test -n ${A}; then " \
+ "setenv partitionset_active B; " \
+ "env delete A; " \
+ "fi;" \
+ "if test -n ${B}; then " \
+ "setenv partitionset_active A; " \
+ "env delete B; " \
+ "fi;" \
+ "saveenv; " \
+ "fi;" \
+ "fi;" \
+ "echo set ${partitionset_active}...;" \
+ "run nand_args; "
+
+#define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \
+ "flash_self_test=setenv testargs test; " \
+ "run nand_boot\0" \
+ "dfu_start=echo Preparing for dfu mode ...; " \
+ "run dfu_args; \0"
+
+#define COMMON_ENV_SETTINGS \
+ "verify=no \0" \
+ "project_dir=targetdir\0" \
+ "upgrade_available=0\0" \
+ "altbootcmd=run bootcmd\0" \
+ "bootlimit=3\0" \
+ "partitionset_active=A\0" \
+ "loadaddr=0x82000000\0" \
+ "kloadaddr=0x81000000\0" \
+ "script_addr=0x81900000\0" \
+ "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
+ "nfsopts=nolock rw\0" \
+ "ip_method=none\0" \
+ "bootenv=uEnv.txt\0" \
+ "bootargs_defaults=setenv bootargs " \
+ "console=${console} " \
+ "${testargs} " \
+ "${optargs}\0" \
+ "siemens_help=echo; "\
+ "echo Type 'run flash_self' to use kernel and root " \
+ "filesystem on memory; echo Type 'run flash_self_test' to " \
+ "use kernel and root filesystem on memory, boot in test " \
+ "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
+ "from memory and root filesystem over NFS; echo Type " \
+ "'run net_nfs' to get Kernel over TFTP and mount root " \
+ "filesystem over NFS; " \
+ "echo Set partitionset_active variable to 'A' " \
+ "or 'B' to select kernel and rootfs partition; " \
+ "echo" \
+ "\0"
-#define MTDIDS_NAME_STR "omap2-nand.0"
-#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR
-#define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \
- "128k(spl)," \
- "128k(spl.backup1)," \
- "128k(spl.backup2)," \
- "128k(spl.backup3)," \
- "1920k(u-boot)," \
- "128k(uboot.env)," \
- "5120k(kernel_a)," \
- "5120k(kernel_b)," \
- "8192k(mtdoops)," \
- "-(rootfs)"
/*
+ * Variant 1 partition layout
* chip-size = 256MiB
*| name | size | address area |
*-------------------------------------------------------
*| rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
*-------------------------------------------------------
*/
+#define MTDIDS_NAME_STR "omap2-nand.0"
+#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR
+#define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \
+ "128k(spl)," \
+ "128k(spl.backup1)," \
+ "128k(spl.backup2)," \
+ "128k(spl.backup3)," \
+ "1920k(u-boot)," \
+ "128k(uboot.env)," \
+ "5120k(kernel_a)," \
+ "5120k(kernel_b)," \
+ "8192k(mtdoops)," \
+ "-(rootfs)"
-#define DFU_ALT_INFO_NAND \
+#define DFU_ALT_INFO_NAND_V1 \
"spl part 0 1;" \
"spl.backup1 part 0 2;" \
"spl.backup2 part 0 3;" \
"kernel_b part 0 8;" \
"rootfs partubi 0 10"
-#define CONFIG_COMMON_ENV_SETTINGS \
- "verify=no \0" \
- "project_dir=targetdir\0" \
- "upgrade_available=0\0" \
- "altbootcmd=run bootcmd\0" \
- "bootlimit=3\0" \
- "partitionset_active=A\0" \
- "loadaddr=0x82000000\0" \
- "kloadaddr=0x81000000\0" \
- "script_addr=0x81900000\0" \
- "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
+#define CONFIG_ENV_SETTINGS_NAND_V1 \
"nand_active_ubi_vol=rootfs_a\0" \
"nand_active_ubi_vol_A=rootfs_a\0" \
"nand_active_ubi_vol_B=rootfs_b\0" \
"nand_src_addr=0x280000\0" \
"nand_src_addr_A=0x280000\0" \
"nand_src_addr_B=0x780000\0" \
- "nfsopts=nolock rw mem=128M\0" \
- "ip_method=none\0" \
- "bootenv=uEnv.txt\0" \
- "bootargs_defaults=setenv bootargs " \
- "console=${console} " \
- "${testargs} " \
- "${optargs}\0" \
"nand_args=run bootargs_defaults;" \
"mtdparts default;" \
"setenv ${partitionset_active} true;" \
"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
"=mtdoops\0" \
- "dfu_args=run bootargs_defaults;" \
- "setenv bootargs ${bootargs} ;" \
- "mtdparts default; " \
- "led dfu 1;" \
- "led stat 0;" \
- "dfu 0 nand 0;" \
- "led dfu 0;" \
- "led stat 1;\0" \
- "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \
+ COMMON_ENV_DFU_ARGS \
+ "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
+ COMMON_ENV_NAND_BOOT \
+ "nand read.i ${kloadaddr} ${nand_src_addr} " \
+ "${nand_img_size}; bootm ${kloadaddr}\0" \
+ COMMON_ENV_NAND_CMDS
+
+#define CONFIG_ENV_SETTINGS_V1 \
+ COMMON_ENV_SETTINGS \
"net_args=run bootargs_defaults;" \
"mtdparts default;" \
"setenv bootfile ${project_dir}/kernel/uImage;" \
"nfsroot=${serverip}:${rootpath},${nfsopts} " \
"ip=${ipaddr}:${serverip}:" \
"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
- "nand_boot=echo Booting from nand; " \
- "if test ${upgrade_available} -eq 1; then " \
- "if test ${bootcount} -gt ${bootlimit}; " \
- "then " \
- "setenv upgrade_available 0;" \
- "setenv ${partitionset_active} true;" \
- "if test -n ${A}; then " \
- "setenv partitionset_active B; " \
- "env delete A; " \
- "fi;" \
- "if test -n ${B}; then " \
- "setenv partitionset_active A; " \
- "env delete B; " \
- "fi;" \
- "saveenv; " \
- "fi;" \
+ "net_nfs=echo Booting from network ...; " \
+ "run net_args; " \
+ "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
+ "bootm ${kloadaddr}\0"
+
+/*
+ * Variant 2 partition layout
+ * chip-size = 256MiB or 512 MiB
+ *| name | size | address area |
+ *-------------------------------------------------------
+ *| spl | 128.000 KiB | 0x 0..0x 1ffff |
+ *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
+ *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
+ *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
+ *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
+ *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
+ *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
+ *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff |
+ *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff |
+ *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff |
+ *-------------------------------------------------------
+ */
+
+#define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
+ "128k(spl)," \
+ "128k(spl.backup1)," \
+ "128k(spl.backup2)," \
+ "128k(spl.backup3)," \
+ "1920k(u-boot)," \
+ "512k(u-boot.env0)," \
+ "512k(u-boot.env1)," \
+ "512k(mtdoops)," \
+ "-(rootfs)"
+
+
+#define DFU_ALT_INFO_NAND_V2 \
+ "spl part 0 1;" \
+ "spl.backup1 part 0 2;" \
+ "spl.backup2 part 0 3;" \
+ "spl.backup3 part 0 4;" \
+ "u-boot part 0 5;" \
+ "u-boot.env0 part 0 6;" \
+ "u-boot.env1 part 0 7;" \
+ "rootfs partubi 0 9" \
+
+#define CONFIG_ENV_SETTINGS_NAND_V2 \
+ "nand_active_ubi_vol=rootfs_a\0" \
+ "rootfs_name=rootfs\0" \
+ "kernel_name=uImage\0"\
+ "nand_root_fs_type=ubifs rootwait=1\0" \
+ "nand_args=run bootargs_defaults;" \
+ "mtdparts default;" \
+ "setenv ${partitionset_active} true;" \
+ "if test -n ${A}; then " \
+ "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
"fi;" \
- "echo set ${partitionset_active}...;" \
- "run nand_args; " \
- "nand read.i ${kloadaddr} ${nand_src_addr} " \
- "${nand_img_size}; bootm ${kloadaddr}\0" \
+ "if test -n ${B}; then " \
+ "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
+ "fi;" \
+ "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
+ "ubi.mtd=rootfs,2048;" \
+ "setenv bootargs ${bootargs} " \
+ "root=${nand_root} noinitrd ${mtdparts} " \
+ "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
+ "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
+ "=mtdoops\0" \
+ COMMON_ENV_DFU_ARGS \
+ "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
+ COMMON_ENV_NAND_BOOT \
+ "ubi part rootfs 2048;" \
+ "ubifsmount ubi0:${nand_active_ubi_vol};" \
+ "ubifsload ${kloadaddr} boot/${kernel_name};" \
+ "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
+ "bootm ${kloadaddr} - ${loadaddr}\0" \
+ "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
+ "bootm ${kloadaddr} - ${loadaddr}\0" \
+ COMMON_ENV_NAND_CMDS
+
+#define CONFIG_ENV_SETTINGS_V2 \
+ COMMON_ENV_SETTINGS \
+ "net_args=run bootargs_defaults;" \
+ "mtdparts default;" \
+ "setenv bootfile ${project_dir}/kernel/uImage;" \
+ "setenv bootdtb ${project_dir}/kernel/dtb;" \
+ "setenv rootpath /home/projects/${project_dir}/rootfs;" \
+ "setenv bootargs ${bootargs} " \
+ "root=/dev/nfs ${mtdparts} " \
+ "nfsroot=${serverip}:${rootpath},${nfsopts} " \
+ "ip=${ipaddr}:${serverip}:" \
+ "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
"net_nfs=echo Booting from network ...; " \
"run net_args; " \
"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
- "bootm ${kloadaddr}\0" \
- "flash_self=run nand_boot\0" \
- "flash_self_test=setenv testargs test; " \
- "run nand_boot\0" \
- "dfu_start=echo Preparing for dfu mode ...; " \
- "run dfu_args; \0" \
- "preboot=echo; "\
- "echo Type 'run flash_self' to use kernel and root " \
- "filesystem on memory; echo Type 'run flash_self_test' to " \
- "use kernel and root filesystem on memory, boot in test " \
- "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
- "from memory and root filesystem over NFS; echo Type " \
- "'run net_nfs' to get Kernel over TFTP and mount root " \
- "filesystem over NFS; " \
- "echo Set partitionset_active variable to 'A' " \
- "or 'B' to select kernel and rootfs partition; " \
- "echo" \
- "\0"
+ "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
+ "bootm ${kloadaddr} - ${loadaddr}\0"
+
+/*
+ * Variant 3 partition layout
+ * chip-size = 512MiB
+ *| name | size | address area |
+ *-------------------------------------------------------
+ *| spl | 128.000 KiB | 0x 0..0x 1ffff |
+ *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
+ *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
+ *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
+ *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
+ *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
+ *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
+ *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff |
+ *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
+ *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
+ *-------------------------------------------------------
+ */
+
+#define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \
+ "128k(spl)," \
+ "128k(spl.backup1)," \
+ "128k(spl.backup2)," \
+ "128k(spl.backup3)," \
+ "1920k(u-boot)," \
+ "512k(u-boot.env0)," \
+ "512k(u-boot.env1)," \
+ "300m(rootfs)," \
+ "512k(mtdoops)," \
+ "-(configuration)"
+
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_NAND_OMAP_ELM
#define CONFIG_OMAP_GPIO
+/* Gpio cmd support */
+
/* Watchdog */
#define CONFIG_HW_WATCHDOG
-/* Stop autoboot with ESC ESC key detected */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_STOP_STR "\x1b\x1b"
-#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
- "press \"<Esc><Esc>\" to stop\n", bootdelay
-
/* Reboot after 60 sec if bootcmd fails */
#define CONFIG_RESET_TO_RETRY
#define CONFIG_BOOT_RETRY_TIME 60
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_ENV
-/* Enable Device-Tree (FDT) support */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_FDT
-
#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
projects / people / ms / u-boot.git / blobdiff