Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / stm32f746-disco.h

diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
index 55280f203f8db445d0312f79d6ad9487ba3ecd12..801980ea3388d2d1742f9392ebf585ec284360e9 100644 (file)
--- a/include/configs/stm32f746-disco.h
+++ b/include/configs/stm32f746-disco.h
@@ -1,6 +1,6 @@
 /*
- * (C) Copyright 2016
- * Vikas Manocha, <vikas.manocha@st.com>
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author(s): Vikas Manocha, <vikas.manocha@st.com> for STMicroelectronics.
  *
  * SPDX-License-Identifier:    GPL-2.0+
  */
@@ -10,40 +10,31 @@
 
 #define CONFIG_SYS_FLASH_BASE          0x08000000
 #define CONFIG_SYS_INIT_SP_ADDR                0x20050000
-#define CONFIG_SYS_TEXT_BASE           0x08000000
 
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SYS_LOAD_ADDR           0x08008000
+#else
+#define CONFIG_SYS_LOAD_ADDR           0xC0400000
+#define CONFIG_LOADADDR                        0xC0400000
+#endif
 
 /*
  * Configuration of the external SDRAM memory
  */
 #define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_RAM_SIZE            (8 * 1024 * 1024)
-#define CONFIG_SYS_RAM_CS              1
-#define CONFIG_SYS_RAM_FREQ_DIV                2
-#define CONFIG_SYS_RAM_BASE            0xC0000000
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_RAM_BASE
-#define CONFIG_SYS_LOAD_ADDR           0xC0400000
-#define CONFIG_LOADADDR                        0xC0400000
 
 #define CONFIG_SYS_MAX_FLASH_SECT      8
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
 
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE                        (8 << 10)
 
-#define CONFIG_STM32_GPIO
 #define CONFIG_STM32_FLASH
-#define CONFIG_STM32X7_SERIAL
 
-#define CONFIG_DESIGNWARE_ETH
 #define CONFIG_DW_GMAC_DEFAULT_DMA_PBL (8)
 #define CONFIG_DW_ALTDESCRIPTOR
 #define CONFIG_MII
 #define CONFIG_PHY_SMSC
 
-#define CONFIG_STM32_HSE_HZ            25000000
 #define CONFIG_SYS_CLK_FREQ            200000000 /* 200 MHz */
 #define CONFIG_SYS_HZ_CLOCK            1000000 /* Timer is clocked at 1MHz */
 
@@ -53,15 +44,9 @@
 #define CONFIG_REVISION_TAG
 
 #define CONFIG_SYS_CBSIZE              1024
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE \
-                                       + sizeof(CONFIG_SYS_PROMPT) + 16)
 
-#define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_MALLOC_LEN          (1 * 1024 * 1024)
-#define CONFIG_STACKSIZE               (256 * 1024)
 
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
 #define CONFIG_BOOTCOMMAND                                             \
        "run bootcmd_romfs"
 
@@ -74,9 +59,24 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_CACHE
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* For SPL */
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SPL_STACK               CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_TEXT_BASE           CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#define CONFIG_SYS_SPL_LEN             0x00008000
+#define CONFIG_SYS_UBOOT_START         0x080083FD
+#define CONFIG_SYS_UBOOT_BASE          (CONFIG_SYS_FLASH_BASE + \
+                                        CONFIG_SYS_SPL_LEN)
+
+/* DT blob (fdt) address */
+#define CONFIG_SYS_FDT_BASE            (CONFIG_SYS_FLASH_BASE + \
+                                       0x1C0000)
+#endif
+/* For SPL ends */
 
-#define CONFIG_CMD_MEM
 #endif /* __CONFIG_H */